¡Obtenga asesoría en español!  Llámenos hoy a (800) 222-4701

Voodoo Lab 2.1mm Output Splitter Adapter Cable - Dual Straight to Straight - 4 inch , 7 dollars and 99 cents - Add to Cart Skip to Product Information

Voodoo Lab 2.1mm Output Splitter Adapter Cable - Dual Straight to Straight - 4 inch

4" Power Output Splitter Adapter for Voodoo Lab Pedal Power 2 Plus and Pedal Power ISO-5 Pedal Power Supplies
Item ID: PPAV
Voodoo Lab 2.1mm Output Splitter Adapter Cable - Dual Straight to Straight - 4 inch
7 dollars and 99 cents
In Stock!

Model:
Length:
Quantity:
Ask An Expert Our Expertly trained Sales Engineers are ready to help! What is a Sales Engineer?
Voodoo Lab 2.1mm Output Splitter Adapter Cable - Dual Straight to Straight - 4 inch
In Stock!

7 dollars and 99 cents

Convenient Way to Power Your Pedals

This article was Written By

Our Product Research Team

Get to know them!

Use the Voodoo Lab Output Splitter Adapter with your Voodoo Lab Pedal Power 2 Plus or Pedal Power ISO-5 to power two effects pedals from just one Pedal Power output. Just connect the male end of the Output Splitter Adapter to a Pedal Power output, and use the female jacks to connect power cables your pedal. The cable with a white stripe is ground lifted so you can eliminate ground loops. You can clean up your pedalboard and power your effects pedals at the same time, with the Voodoo Lab Output Splitter Adapter!

Maximize your pedal capacity with this "Y" adapter

Voodoo Labs' Output Splitter Adapter maximizes the capacity of your Pedal Power or other power supply, allowing you to power two pedals from a single outlet. Insert the male 2.1mm barrel tip into an open outlet, then connect your power cables (not included) to the 2.1mm female ends. Note that this will not split or alter the voltage of your outlet: a 9V outlet splits to two 9V outlets, an 18V outlet splits to two 18V outlets, etc. The Output Splitter Adapter from Sweetwater features an integrated ground lift to eliminate ground loops.

Voodoo Lab Output Splitter Adapter Features:

  • Adapter cable for splitting one Voodoo Lab Pedal Power output to power two effects pedals
  • Cable with a white stripe is ground lifted so you can eliminate ground loops
  • 2.1mm jack connects to your Voodoo Lab Pedal Power, female jacks receives 2.1mm plugs from your pedals
  • Length: 4"