How to Update Triton Studio System Software
How to Update Triton Studio System Software
Note: This updating will not erase any Programs, Combis or Global data in the Triton Studio!
1. Hold down the ENTER and LOCATE buttons while turning on the Triton Studio. The display
will show “Please insert System 1 disk”.
2. Insert System Disk 1 of the 1.0.6 OS version into the drive.
3. New System Software installation will begin at this point. DO NOT TOUCH THE KEYBOARD OR INTERRUPT THE POWER WHILE THE SYSTEM IS BEING UPDATED!
4. During installation the following messages will appear:
– “Now loading…”
– “Now erasing ROM”
– “Checking system’s checksum”
5. Shortly, you will be prompted with “please change to System 2 disk”
6. Eject Disk 1 and insert System Disk 2 into the drive. When it finishes loading you
will be prompted for the next disk. Continue until you’ve loaded all the disks.
7. When the following messages appear, installation has been completed successfully and the
Triton Studio will restart automatically:
– “Checking the system’s check sum”
– “System load was completed”
8. Enjoy your new System Software!
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
