Troubleshooting: Upon boot-up, my JBL LSR 4300 Control Center software doe not “recognize” the connected speakers. What’s going on?
This could be caused if the USB connection and/or Network cables are not properly connected, or if there is a missing terminator.
To remedy this, check all network connections to make sure the CAT5 cable is inserted all the way into each jack. Also make sure you have two network terminators installed in your system so that all RJ485 jacks are in use. Confirm the USB cable from your computer is connected to the front left speaker (the speaker with the Left DIP switch in the “on” position.
This troubleshooting item can also be found in Appendix F of the Owner’s Manual for the LSR4326p and LSR4328p.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
