Is there an Analog quick start for the KSP8?

1. Make sure the volume on your sound system is turned all the way down.
2. Connect your input and output cables to analog inputs 1 and 2 on the back panel; connect your
output cables to analog outputs 1 and 2.
3. Double check that the audio volume controls in your hookup are all the way down. Now, press
the switch on the back panel of the KSP8 to turn the unit on. (We are assuming that you have
taken the initiative to plug the KSP8 in already.)
The diagram below shows the Studio:STUDIO page, which will appear on the KSP8’s display
when you first power up the unit. If a different screen appears, despair not; simply press the
STUDIO soft button to bring up this screen.
4. Highlight “99 Default 4 Stereo” on the Studio:STUDIO page by using the alpha wheel or the +
or – keys to scroll through the list. Press the FXBUS soft button to bring up the FXBUS page:
5. The value of the Type parameter (that is, the text to the right of the word Type) will either be
Chain or Preset. If it is not set to this value already, highlight this field (by moving there with
left cursor button), then use the alpha wheel or + and – keys to set the type to Preset.
6. Now press the right cursor key on the front panel of the KSP8 to highlight the Preset name field
(the field to the right of the word Preset). You can now use the alpha wheel or + and – keys to
scroll through the KSP8’s different presets. Try pressing the + and – keys simultaneously to
jump between groups of different types of effects within the preset list.
7. Finally, send an audio signal (such as the output of a CD player) to the KSP8’s input. Slowly
turn up the volume on your sound system and listen to the sounds of the KSP8’s different preset
effects. We expect that this may keep you occupied for a while, but we do hope that you’ll
make time to read the rest of this manual when you’re ready to become a KSP8 power user.

Knowledge Base