How do I switch between ADAT and S/PDIF optical on the Rosetta 200 digital output?
By default the Rosetta is set for ADAT optical. If you want to switch to S/PDIF optical, use the following procedure:
– Hold down the “Sample Rate (AES FMT)” button. Now on the digital output source, you should see that the LEDs for ADAT and AES will be lit up.
– Hit the “Source (SRC)” button and that will switch it to “S/P OPT”. If you want to go back to ADAT, hit the “Source (SRC)” button again while holding down the “Sample Rate” button.
*Keep in mind that if you re-set the Rosetta 200 (holding down the sample rate button while powering on) it will re-set to ADAT optical.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
