How do I Sub-mix Drums through the Drawmer ADX100 Plug-In

No cables needed!

Review: D8B Manual (v3) Pages 29, 36, 48-50, 56, 61-63, 104 & Drawmer ADX100 Owner’s Manual

1. Setup your Drum Levels and Panning.
2. Load Drawmer Plug In. (Slot 5)/(Slot 6)
3. Turn L/R Assign Off for all Drum Channels.
4. Turn Buss 1 & 2 On for all Drum Channels.
5. Switch to Masters Fader Bank.
6. Make sure that Buss 1 & 2 Faders are set to -U- (Channel Strips 17/18)
7. Switch to Mic / Line Fader Bank (1-24)
8. Ch. (23) Select Pre DSP Insert| Channel Patch| Bus 1
9. Ch. (24) Select Pre DSP Insert| Channel Patch| Bus 2
10. Ch. (23) Select Post DSP Insert| (P05 – Drawmer L)
11. Ch. (24) Select Post DSP Insert| (P06 – Drawmer R)
12. Pan Ch. (23) Left, Pan Ch. (24) Right.
13. Turn L/R Assign On for Ch’s (23)/(24)
14. Shift Select All Drum Channels and Ch’s (23) and (24)
15. From Computer Screen. Select: Channel Menu| Adjust Channel Delay…
16. Set Channel Delay for all Non-Selected Channels: ***

Knowledge Base