Saving Mixer Settings:

In order for the mixer settings for a Song to be saved with the Song, they must be stored as a Scene Memory.

NOTE: The steps involving ‘Confirmation’ prompts will not be necessary if the ‘Store/Recall Confirmation’ options have been disabled in the ‘UTILITIES: Prefer 1. page’.

TIP: Most of the actions in the steps below can also be performed with an attached mouse.

Saving Mixer Settings:

1) Configure the AW4416 with ALL of the desired parameter settings for the beginning of the selected Song.

2) Press the [SCENE] button in the ‘AUTOMATION’ section above the (DATA/JOG) dial.

3) Use the (DATA/JOG) dial to select an empty or blank Scene Memory location as indicated by a title of ”[ NO DATA! ]”. Once selected, the Scene Memory location will begin blinking.

4) Press the [STORE] button. The ‘TITLE EDIT’ page will appear.

5) Name the Scene using the character template in the ‘TITLE EDIT’ page.

6) When completed, use the ‘CURSOR’ buttons to select ‘OK’, then press the [ENTER] button. The new Scene will be saved AND associated with the current Song.

7) Repeat steps 1-6 to create additional scenes, or ”mixes” of the Song.
NOTE: When a Song is recalled, the mixer settings from the previous Song will remain as the current settings until a different Scene Memory is recalled.

Knowledge Base