I have a Quantum Atlas drive in a Kingston RJRInt mounting tray, and the drive won’t mount OR change SCSI ID’s
First, make sure that the SCSI ID selector cable (a bundle of about 7 colored wires) are connected between the inner tray and the hard drive itself).
Second, check jumper settings. Here’s what we’ve found works. If you pull the drive tray out, you can slide the bottom cover off and see the circuit board on the Quantum drive. Toward the front of the drivem, you’ll see a row of about 14 pairs of gold colored pins, two pairs have black jumpers on them. Simply remove the jumpers, and slide the cover back on. Reinsert the tray & the MX should automatically boot & mount the drive. At this point you should be able to initialize that SCSI ID as HFS+.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
