How to I make the EXP100F pedal work on the XK3
First, be sure that the pedal is connected to the EXP2 port (says EXP100 only below that jack).
1. Press Menu/Exit
2. Select PAGE A (with the Page button)
3. Select the Control [4] button
4. Use the up and down arrows until you see “Express.”
5. At this Expression page set SOURCE to EXP-100
6. Move the foot pedal up and down and watch the MONITOR display, it should be moving between 0 and 127.
If you see the Monitor numbers moving as you move the medal, it’s a good sign that the pedal is working.
If the pedal does not control volume, reset the XK3 keyboard.
You can do this but pressing Menu/Edit again, and selecting Page E. Touch the [1] Default button and use the Parameter button to choose ALL. Press the OK soft key and the keyboard will be reset. (Not that this may remove any user programs or setups you’ve customized).
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
