How Do I Load my JV-Series Patches into the XP-60/80?
The XP-80 will accept SysEx dumps from the JV-80, JV-880, JV-90 and JV-1000. However, you must do a bulk dump of the ‘Temporary Memory’ – one Patch at a time. Here is an example of this procedure using an XP-80 and a JV-80:
1. Connect a MIDI cable from the MIDI OUT of the JV-80 to the MIDI IN of the XP-80.
2. Press WRITE on the JV-80.
3. CURSOR to BULK and press ENTER on the JV-80.
4. CURSOR to TEMPORARY and press ENTER on the JV-80.
5. CURSOR to PATCH and press ENTER on the JV-80.
6. Press ENTER on the JV-80. The currently selected Patch in the JV-80 will be transferred to the XP-60/80.
Use the Write procedure (see section IV) if you wish to save this new Patch in the XP-60/80.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
