How to Update the Firmware on an Elektron Model:Cycles

In this guide, we will show you how to use the Elektron Transfer software to update the firmware on your Elektron Model:Cycles. The entire process is really quick, but be sure not to turn off the device any time during the process. Follow the instructions below to get started.

Elektron Model:Cycles firmware update

Updating the firmware on your Elektron requires transferring a SysEx file from your computer to the hardware using the Elektron Transfer app. You’ll first need to download the Transfer app, then connect the device to your computer. 

1. Go to the Models:Cycles support page and download the latest OS file and the Transfer app.
2. Navigate to your Downloads folder, launch the Transfer installer, and follow the on-screen instructions.
3. Connect your device to a USB port on your computer, turn it on, then launch the Transfer app.
4. Set the Model:Cycle as the MIDI In and MIDI Out device, then click Connect.
5. Open the folder where you download the OS file to, then drag and drop it anywhere in the Drop files here area.
6. When you receive the Update OS Now prompt, press the data encoder knob to complete the process.

IMPORTANT: If this is your first time working with SysEx files, check out our article on how to work with SysEx files.

How Do I Send and Receive SysEx on PC or Mac?

Learn more about what SysEx files are and how to work with them on PC and Mac.

Knowledge Base