How do I choose an input source on the DM24?

Input sources
Any mic/line input can be assigned to any channel (1
through 32). The same mic/line input can be assigned
to more than one channel, if required.
1 In either of the two channel I/O screens, move
the cursor to the source column of the group
of channels.
2 Use the § and ¶ keys to move up and down
the column.
NOTE
Note that the returns (as explained below) are pre-mapped
and cannot be changed here. The cursor never
highlights them.
3 Use the dial to select from the available
options as listed here (x represents a displayed
number in this table):
NOTE
Since input sources can be shared (routed to more than
one input at once), simultaneous recordings can be
made of the same take. For example, you can try
recording the same vocal take with different compression
or EQ settings.
Screen display Meaning
M/L x Mic/line analog input x
D-INx-L (or R) Digital input x (1 or 2) – either the left
or the right channel
ASN RTNx One of the four assignable returns
EFF x-L (or R) Internal effector 1 or 2, left or right
channel

Knowledge Base