How do I assign the Data Entry options?

DATA ENTRY assignments: Pressing the MIDI/SELECT button then pressing a key labeled by its MIDI function (such as velocity offset, aftertouch, reverb depth, pan pot, volume, CC data) and then moving the data entry slider, allows you to select the transmitting value of the chosen function.
For example, if you want to change the value of the velocity offset, first press the MIDI/SELECT button and then the velocity key. Second, change the data entry slider to the value you want. Finally, press the MIDI/SELECT button again to finish the change.
Pressing the MIDI/SELECT button, then the CC#key, then assigning a MIDI control parameter by entering in the appropriate value using the numbered keys, will allow you to assign any MIDI control value to the data slider. After selecting the MIDI control change value, press the Enter key and then MIDI/SELECT again to finish the selection. For a chart of MIDI control change values, see Appendix A in this manual.
You can also use the data slider to send this MIDI controller information in realtime. When the Oxygen 8 powers up, the DATA ENTRY slider defaults to a MIDI controller value of 7. A Controller 7 message is the equivalent of a MIDI
volume message.Once you ‘ve selected one of the keys that represents a controller value, i.e., velocity, aftertouch, pan pot, etc., or assigned a value using the number keys, the DATA ENTRY key then takes on that value and will transmit that type of controller information when the slider is moved.

Knowledge Base