What is the DiMarzio EP1000 Copper Shielding Tape used for?

The DiMarzio EP1000 Copper Shielding Tape is designed to reduce unwanted hum, buzz, and noise in electric guitars and basses. By lining the control cavities and pickup routes with this conductive tape, you create a Faraday cage that blocks electromagnetic interference (EMI) and radio frequency interference (RFI), resulting in a cleaner, quieter signal from your instrument.

How do I install the DiMarzio EP1000 Copper Shielding Tape in my guitar?

To install, first ensure the guitar's cavities are clean and dry. Cut the tape to fit the contours of the cavity walls and floor. A key benefit of DiMarzio copper tape is that both the foil and glue are conductive, meaning overlapping pieces is not required to ensure continuous conductivity. Once the entire cavity is covered, connect the shielding to your guitar's ground circuit, typically at the output jack or a pot casing, to complete the shield.

What types of noise does this copper shielding tape help eliminate?

This copper shielding tape is highly effective at reducing noise caused by electromagnetic interference (EMI) and radio frequency interference (RFI). This includes common issues like 60-cycle hum from lighting, static from nearby electronics, and general buzz that can plague single-coil pickups or poorly shielded cavities. It helps create a quieter foundation for your guitar's tone.

Is the DiMarzio EP1000 tape conductive, and how does that benefit my guitar?

Yes, the DiMarzio EP1000 tape is highly conductive, with both the foil and the adhesive being conductive. This is crucial because the entire shielded area needs to be electrically continuous and properly grounded to effectively block interference. The conductive adhesive is a significant benefit as it ensures a solid, continuous shield without requiring overlapping pieces or soldering, simplifying installation and creating a complete and effective shield that diverts noise away from your guitar's sensitive electronics.