More new Peavey gear in stock in our giant warehouse….
PR 10P – The lightweight PR 10P is bi-amped with 200 watts going to the premium 10-inch woofer and 70 watts powering the 1.4-inch titanium compression tweeter and DDT compression. Includes built-in three-channel mixer.
PR 15P – Here’s the bigger brother of the PR 10P. It has all the same features, but with a 15-inch heavy duty woofer with a massive 50-ounce magnet and 2 3/8-inch voice coil for better bass response.
XR 684F – Here’s a 9-channel powered mixer with two x 200 watts of power, one stereo and one mono graphic EQ, built-in digital effects with 48-bit resolution, and 3-band EQ on each channel.
CS 4080HZ – Just two rack units high, this stereo power amp pumps out a stunning 2,040 watts per channel and includes Peavey’s exclusive DDT compression/anti-clipping protection plus two variable speed fans.
PR 12 – Two-way, lightweight speaker system with lightweight, roadworthy molded exterior. Can handle up to 400 watts or 800 watts peak.
SP 15M – Two-way, full-range floor monitor with 15-inch BWX Black Widow woofer and RX 22 compression driver with ferrofluid cooling and a 2-inch titanium diaphragm. Will handle up to 2,000 watts peak.
SP 12M – Two-way, full-range floor monitor with 12-inch BWX Black Widow woofer and RX 22 compression driver with ferrofluid cooling and a 2 inch titanium diaphragm. Will handle up to 2,00 watts peak.
SP3 – PA speaker with Quadratic Throat CD Waveguide technology handles 2,400 peak watts through a 15-inch Black Widow woofer, 6.5-inch midrange with phase plug and RX 22 compression driver.
Penta 412 – Specially voiced 4 x 12-inch speaker cabinet for use with the Peavey Penta Head features rear-mounted drivers, 11-ply birch baffle and 1/2-inch poplar sides with brown weave grillecloth.
Penta Head – Single-channel tube amplifier with five selectable EQ/gain voicings, eight tubes (four EL34 and four 12AX7), 140 watts of power and PentaTone circuitry to select between five British-inspired voicings.
