¡Obtenga asesoría en español!  Llámenos hoy a (800) 222-4701

Crest Audio Stage 2x2D Direct Injection Network Audio Interface , 579 dollars and 99 cents - Add to Cart Skip to Product Information

Crest Audio Stage 2x2D Direct Injection Network Audio Interface

Dante/AES67 Audio Interface and DI Box with 70V Line Input, Parallel Hi-Z Through, PoE, and Up to +24dB of Continuous Gain
Item ID: Stage2x2D
Crest Audio Stage 2x2D Direct Injection Network Audio Interface
579 dollars and 99 cents
In Stock!

Only 2 left in stock! Order Soon!
Ask An Expert Our Expertly trained Sales Engineers are ready to help! What is a Sales Engineer?
Sweetwater Gear Exchange

Have one to sell?
Check out Sweetwater's Gear Exchange!
Learn More

Crest Audio Stage 2x2D Direct Injection Network Audio Interface
In Stock!

Only 2 left in stock! Order Soon!
579 dollars and 99 cents

Versatile Interface and DI for Your Network

This article was Written By

Our Product Research Team

Get to know them!

The Crest Audio Stage 2x2D is a Dante/AES67 audio interface plus DI box with a few tricks up its sleeve. Proprietary mic and line preamps cover an unusually wide range of sources from delicate condenser microphones to the high-voltage output of 70V distributed PA systems. A dedicated 1MΩ hi-Z input with parallel Through lets guitarists feed their amp and capture a clean DI simultaneously. Two channels of analog audio route to any Dante- or AES67-enabled network, with two channels returned as configurable stereo or mono line-level outputs. Powered entirely over a single Ethernet cable, the Stage 2x2D simplifies installation without compromising performance, whether you place it in a touring rack or a permanent installation.

Ready for installed sound

Most DI boxes are designed for instrument and line-level signals, so if you plug into a 70V distributed amplifier system, you'll clip the input instantly. The Stage 2x2D's line input is built to handle it natively, with a +44dBu peak ceiling that accommodates the high-voltage signal levels common in installed sound systems found in hotels, convention centers, houses of worship, and performance venues. According to Sweetwater's live sound engineers, this means that the Stage 2×2D allows you to tap directly into an existing 70V PA system for recording, monitoring, or network routing without additional attenuation hardware between the source and the box.

Crest Audio Stage 2x2D Features:

  • Versatile audio interface and DI box for Dante- or AES67-equipped networks
  • Combo jack accepts mic- or line-level signals, while a dedicated 1MΩ hi-Z input is optimized for passive guitar and instrument pickups
  • High-performance mic preamp accepts input levels from -60 to +4dBu with up to +24dB of gain, maintaining 20dB of headroom at every setting with no pad required
  • Line input operates from -40 to +24dBu nominal with +44dBu peak capability, allowing direct connection to 70V distributed power amplifier systems without fear of clipping
  • Front-panel switch applies +48V phantom power at the XLR connector for condenser microphone compatibility
  • Proprietary preamps deliver audiophile-grade professional signal levels for clean, transparent reproduction of any audio source
  • +4dBu balanced DI-Out assignable from Mic/Line or hi-Z input for flexible source routing, with a ground-lift switch to eliminate hum from ground loops
  • Parallel hi-Z Through lets you feed your amp and capture a clean DI signal at the same time without interrupting your signal chain
  • 2-ch. A/D conversion routes audio to any Dante- or AES67-enabled network, with 2 channels of network audio returned as line-level outputs for monitoring or distribution at the stage
  • Returned network audio can be configured as 2-ch. stereo or single-channel balanced mono, so you can route to stereo recording rigs or mono PA systems without needing extra gear
  • Powered by IEEE 802.3af/at PoE with no need for an external power supply
  • Front-panel Signal Present/Peak LEDs for fast gain staging, plus dedicated network status LEDs to confirm PoE and data link at a glance
  • In-ear monitoring and signal verification via front-panel Headphone output with level control and monitor select switch
  • Robust aluminum extruded chassis with recessed, protected connectors and removable rubber bumpers is road-ready for any live or touring production
  • Optional 1U single or dual rack mount kit available for flexible permanent installation

Warranty Info

Sweetwater's FREE 2-Year Total Confidence Coverage Warranty

Extra peace of mind at no extra cost.

  • Save money with FREE parts and labor
  • Get back to making music with the industry's fastest turnaround time
  • Fix it the first time with our award-winning, factory-certified Service Department
Learn More about Total Confidence Coverage