Rippling Water Effect for Any Surface in the Room
The Eliminator Aqua LED 2 casts a moving water effect across any wall, ceiling, or floor you aim it at. A 50-watt white COB LED drives the effect through a 5-segment color wheel of red, green, blue, yellow, and white. Flip the rear-panel switch to let the wheel turn, blending each color into the next, or stop it on a single shade. Sweetwater lighting techs like to hold the Aqua LED 2 on one color for water scenes in stage productions and themed rooms, letting that steady shade establish the location for as long as the scene runs. A manual focusing lens crisps the pattern at whatever distance you hang it, and the 30-degree beam spreads it across a generous stretch of surface. An included hanging bracket and multi-voltage operation let it go up in any venue, and with no DMX to patch or program, the rear-panel switch is the whole setup. Hang it, focus it, and the Aqua LED 2 keeps the water moving on its own through every hour the doors are open.
Related Videos: Aqua LED 2 Water Effect Fixture
Eliminator Aqua LED 2 Features:
- Self-contained water effect light for clubs, restaurants, museums, stage productions, and themed attractions
- 50W white COB LED projects a bright, moving water ripple onto walls, ceilings, and floors
- 5-segment color wheel in red, green, blue, yellow, and white
- Rear-panel switch selects continuous color scrolling or single-color operation
- Manual focusing lens and 30° beam angle for a sharp pattern at your throw distance
- Works with or without fog for flexible placement in any space
- Runs without DMX, with no programming required
- Fan-cooled design stays cool and supports 100V–240V multi-voltage operation
- Includes hanging bracket and IEC power cable for quick installation

