What are SYS-CTRL 1 and SYS CTRl2?

Certain Patch and Effects parameters can be modified in real time by controllers, adding an additional amount of expressiveness to a performance. These controllers include aftertouch (key pressure), modulation, foot pedal, and a special type called ‘System Controllers.’ System Controllers allow you to globally assign a MIDI controller to one of two System Controller locations. For example, the XP-60/80 contains many Patches that respond to aftertouch. Let’s say you are using a remote keyboard that transmits modulation but does not transmit aftertouch. Because most of these Patches are programmed to respond to aftertouch as a System Controller, you can reassign modulation as a System Controller, in place of aftertouch, and use it to control the Patches in the XP-60/80.

Use the following procedure to assign the System Controllers:

1. Press SYSTEM.
2. Press F4 [Control] to select the Control Assign page.
3. CURSOR to Sys-Ctrl 1 and use the VALUE dial to select the desired controller (defaults to CC97: Aftertouch).
4. CURSOR to Sys-Ctrl 2 and use the VALUE dial to select the desired controller (defaults to CC02: Breath).

Knowledge Base