Trinity Series Importing the Effects from a Program Into the Sequencer

Once you have placed the program on a track in the sequencer:
1) Press the P7 button to enter the Effect Grouping page.
2) You will see the effects status for the first 8 tracks on this page. They will all be set to “OFF”. Touch the parameter for Track which contains the program that you wish to copy the effects for. In other words, if the program that you wish to copy the effects for is on track 6, touch the “OFF” parameter under the number 6.
3) Using the value slider, wheel or buttons, select the number “4”. This will allow for the effects to be copied, as programs use up to 4 effects.
4) You will see a new tab on the bottom of the screen bearing the number of the track followed by “FX”. Touch that tab.
5) Once in the effect select screen, touch the arrow on the top right-hand side of the screen.
6) Touch “Copy Insert Effects”.
7) Using the value slider, wheel or buttons, select the Program you wish to copy the effects from.
8) Touch the box next to “All” so that it is checked.
9) Touch “OK”
10) When asked “Are you sure”, touch “OK”. The effect parameters for the program you previously selected in step 7 have been copied to the track you are currently on.

To copy the Master Effects:
1) Press the SEQ to enter the Sequencer mode.
2) Press the P8 button to enter the Master Effects page.
3) Touch the arrow on the top right-hand side of the screen
4) Touch “Copy Master Effects”.
5) Using the value slider, wheel or buttons, select the Program you wish to obtain the effects from.
6) Touch the circle next to “All” so that it is filled.
7) Touch “OK”.
8) When asked “Are you sure”, touch “OK”. The Master Effect parameters for the Combination selected have been copied to the Sequencer.

Knowledge Base