How do I select a program?

As an example, here’s how to select the Normal mode
program C-3 (program 3 of bank C)
1.Make sure that you are in Normal mode.
When you turn the power on, the CX-3 will automati-cally
be in Normal mode.
In Normal mode, the [EX MODE] key, [EDIT] key, and
[GLOBAL] key LEDs will be dark.
If the [EX MODE] key LED is lit, press the [EX MODE]
key once.
If the [EDIT] key or [GLOBAL] key LED is lit, either
press the lit key once or press the [EXIT] key.
2.Press the [+] key twice to select bank C..
Notice that C appears at the left side of the display.
3.Press the PROGRAM [3 ] key..
The C-3 program will be selected, and the display will
show the program number and program name.
To select an EX mode program, verify that you are in
Normal mode in step 1 and then press the [EX
MODE] key. Then perform steps 2 and 3.

Knowledge Base