Patch Selection in the Sequencing Template

In the Performance mode, the XV-5080 is a 32 Part Multitimbral Module that can be used for sequencing.
As a convenience, the XV-5080 has a preset Performance designed specifically for use with sequencing .
Use the following procedure to select the Sequencing Template Performance:

1. Press PERFORM.
2. Press PRESET.
3. Press A.
4. Use the VALUE Dial to select ” PR:A 01 Seq:Template.”

There are two different ways to manually select Patches for individual Parts in a Performance.
Use the following procedure to access the Performance Part display:

1. Press F3 [Part]
2 Press A (also labeled 1/17) so that “Part #1” is displayed.
3. Use the CURSOR to highlight the Patch Number.
4. Rotate the VALUE Dial to select a different Patch.
5. Press B (2/18) to select “Part #2” and repeat the process.
6. Press PERFORM to return to the Performance Play display.

For an alternate method use the following procedure to access the Part Play display:

1. While holding PERFORM, press PATCH so they are both lit.
2. Use the VALUE dial to select a Patch for the currently selected Part.
3. Use the CURSOR ( < / > ) buttons to select the next Part and repeat the process.
4. Press PERFORM to return to the Performance Play display.

Knowledge Base