How to load sample patches

Loading Sample Patches
The key to the XV-5080’s flexibility is its ability to play
back sample files from a variety of sources. Once
equipped with optional RAM, the XV-5080 can load
and play back Roland S-700 series, Akai S1000 and
S3000 series, AIFF and WAV samples. Use the
following procedure to load and play patches from a
CD-ROM library. In this example, we™ll load samples
designed for use with the XV-5080:
1. Power off the XV-5080, and then connect your
CD-ROM drive to the SCSI connector on the
XV-5080™s back panel.
2. Power on the CD-ROM drive, then the XV-5080.
3. Insert the desired CD-ROM into the CD-ROM
drive.
4. Press DISK, and then press F1 [Load]
5. Press F1 [Drive] and turn the VALUE dial to
highlight the CD-ROM drive.
6. Press F6 [OK] to select the drive.
7. Turn the VALUE dial to select the PATCH folder
and press the right cursor ($) to open the folder.
8. Turn the VALUE dial to select the patch you™d
like to load and press F5 [Mark] to place a il lT
next to the patch™s name on the display.
9. Press F6 [Select], and then F6 [Load].
10. Turn the VALUE dial to select a user patch
location (1-128) in which to store the loaded
data.
11. Press F6 [OK] and then F6 [OK] again to load
the sample into the selected user patch location.
12. Press PATCH and turn the VALUE dial to select
the loaded sample patch.
Note: Any sample patch loaded into RAM is lost
when the XV-5080™s power is turned off. While the
patch™s name will still appear in the user patch
location, you™ll have to re-oad the sample patch in
order to hear it.

Knowledge Base