I can’t get any sound out of my Mackie ProFx mixer.
First, make check that the mixer is turned on, everything is plugged in, and your speakers/amps are turned on.
Next, make sure the gain and faders are set appropriately. If you are sending out of the Main Out, make sure the channels you are using have the L-R switch engaged.
Be sure the mute switches are not engaged on any channels that you are using. Also, if your mixer has Solo buttons, make sure none of those are engaged either.
If you are trying to send signal through your auxes, make sure the aux send on each channel you are using is turned up as well as the master aux.
Finally, make sure the Break switch is not engaged. This can be found near the master fader. The Break switch mutes all channels.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
