Transform Your Nearfields Into a Full-range Monitor System
While most professional subwoofers are optimized to mate with a specific make, series, or model of main monitor, the Subwoofer Pros Studio Sub2-10C was designed to be a universal sub that blends seamlessly with any mains. Tuned for accurate low-frequency response below 100Hz, the Studio Sub2-10C is ideally used with a full-range signal sent to both it and the main monitor. Its onboard switchable lowpass filter constrains its operation between 95Hz or 60Hz down to 8Hz using a 12dB/octave slope.
Related Videos: Studio Sub2-10C Powered Studio Subwoofer
Easy to integrate into any monitoring setup
Whether a main/subwoofer rig behaves like an integrated system depends on how you set it up with the tools provided. Subwoofer Pros designs their control panels to execute seamless sub/main integration. A confusing, complicated control set, as found on many subs, is both hard to understand and counterproductive to the task at hand. By including only the essential controls, the Studio Sub2-10C also keeps set-up mistakes to a minimum. Sweetwater has extensive experience along these lines, and we can verify that the Studio Sub2-10C is very easy to set up successfully.
Deeper, tighter bass you can depend on
Subwoofer Pros’ Studio Sub2-10C doesn’t skimp on low bass, accurately delivering a full range of tight deep bass you can depend on to make informed decisions about kick drums, synth basses and other low-frequency-critical material, along with the overall balance of your mixes. Unlike many subs that only extend to 32Hz or so, the Studio Sub2-10C flatly extends down to 16Hz (±3dB) — low enough to feel the crush of a well recorded bass drum or the bone-rattling pedal tones of a pipe organ.
Uniform response at every frequency and listening level
While many sub manufacturers use ported or bass reflex designs, Subwoofer Pros know that these designs produce increasing amounts of distortion as monitoring levels increase. The Studio Sub2-10C’s onboard dynamic electronics deliver uniform response at every frequency — regardless of how hard the subwoofer is being driven. Reproducing quick, tight bass with each note having the same emphasis is a primary design goal at Subwoofer Pros, and the proof is in the listing. Add the Subwoofer Pros Studio Sub2-10C to your monitoring setup and hear what you’ve been missing. Your music will sound the better for it!
Subwoofer Pros Studio Sub2-10C Features:
- 300-watt active 10-inch studio subwoofer
- 18mm,13-ply birch plywood cabinet
- Rugged Black Ro Tex finish; black cloth grille
- 10-inch high-excursion EL-10 driver
- Input connectors: 2 x XLR in, Summing
- Maximum continuous amplifier power: 300 watts
- Lowpass filter: 95Hz Infra Filter, 80Hz, 60Hz, 40Hz selectable
- Polarity switch; dynamic filter overload protection
- LED indicator: Green: Power on; Orange: Dynamic Filter threshold
- Mains voltage: 100–240 VAC, auto sensing
- Frequency response: ±3dB, 16Hz to 95, 80, 60, or 40Hz (contingent on switch position)
- Max SPL: 93dB SPL @ 40Hz, 1 meter
- Weight: 29 pounds
