Superior Noise-free Signal Transmission Up to 300 Feet
Ask any of Sweetwater’s seasoned stage pros, and they’ll be quick to tell you how long 1/4-inch cable runs on the stage or in the studio can quickly sap your signal’s high end and introduce hum, hiss, and buzz. Thankfully, Radial’s SGI (Studio Guitar Interface) instrument line driver allows you to take any unbalanced instrument signal and drive it up to 300 feet with pristine clarity and zero unwanted noise. This set consists of both the transmitter (SGI-TX) and the receiver (SGI-RX), with each device boasting premium Jensen transformers for optimal sonic performance. What’s more, the SGI-TX comes equipped with a handy Drag control, giving you the power to dial in the proper load for your guitar’s pickups. The SGI-RX also features a Ground Lift button to cut out ground-related hiss and hum. Finally, while both the SGI-RX and the SGI-TX can be powered via their included 15-volt power supply, this combo has been updated to accommodate the power from scores of pedalboard-standard power supplies. Whether you’re tracking in the control room or routing your signal to a far-off backline, Radial’s SGI system ensures your instrument signal always performs to the highest level possible.
Fueled by top-quality Jensen transformers
Boasting premium-quality components from stem to stern, both the SGI-TX and the SGI-RX leverage top-class Jensen transformers. These transformers are a key component of the SGI ecosystem, converting your signal at both the beginning and end of the system and defeating hum before it can even begin. Furthermore, these industry-leading transformers ensure a wide and flat frequency response with diminished noise and distortion, superior dynamic range, and an optimized signal-to-noise ratio.
Radial SGI Features:
- Instrument line driver system that allows you to take any unbalanced 1/4-in. instrument signal and drive it up to 300 ft. via balanced XLR
- Bundle includes the SGI-TX transmitter and the SGI-RX receiver
- Defeats the diminished top-end detail and noise often introduced by long 1/4-in. cable runs
- Both the transmitter and the receiver boast premium Jensen transformers to send your signal with a wide, flat frequency response, reduced noise, enhanced dynamic range, and an optimized signal-to-noise ratio
- SGI-TX features a Drag control that allows you to dial in the optimal load for your guitar’s pickups
- SGI-RX comes equipped with a Ground Lift button to cut out ground-related noise
- Perfect for tracking guitar parts in the control room or routing your signal to a far-off backline when you’re performing
- Includes a 15V power supply, and the system has been updated to accept most pedalboard-standard power supplies
