Amazing Millennia Preamp for Your 500 Series Rack
Add the unrivaled sound quality of a genuine Millennia preamp in your 500 series rack, with the Millennia HV-35. Perfect for low-gain dynamic microphones such as ribbon mic, the HV-35 delivers up to 75dB of freakishly noise-free gain. A front-panel instrument input also makes the HV-35 a fantastic pre for tracking bass direct, particularly instruments with high-character/low-gain passive pickups. Other onboard functions, such as an 80Hz highpass filter and a 15dB pad add extra versatility to the HV-35, and an impressive sub-3Hz to over-300kHz frequency response ensures that no nuances, however subtle, are lost in translation.
Related Videos: HV-35 500 Series Microphone Preamp
- API 500 series compatible format single-channel microphone preamplifier
- Continuously variable gain control (up to +65dB)
- 10dB gain boost setting for DC-coupled ribbon mics (for up to +75dB of gain total)
- Front panel instrument input
- 80Hz highpass filter
- 48V phantom power
- Switchable 15dB pad
- Polarity flip switch
- Minimum Gain:8.5dB
- Maximum Gain: 75dB
- Frequency Response:+0 / -3dB, sub 3Hz to beyond 300kHz
- Noise: 60dB Gain, 10Hz-30kHz, Inputs common -133dB EIN
- Total Harmonic Distortion + Noise (35dB Gain, 10Hz-20kHz bandwidth, +27dBu Out): < .001%, Typ. < .0005% (< 5 ppm)
- Intermodulation Distortion ((50Hz & 7kHz) 35dB Gain, +27 dBu Out): < .0009%
- Phase Response (35dB Gain, 50Hz-20kHz bandwidth, +27 dBu Out): < 2 degrees deviation
- Common Mode Rejection Ratio (35dB Gain, 10Hz-20kHz bandwidth, 100 mV C.M.): > 65dB, Typ > 85dB
- Slew Rate (35dB Gain, +27dBu Out): > 25V per microsecond
- Maximum Input Level (20Hz-40kHz): +23dBu (no attenuator pads required)
- Maximum Output Level (20Hz-40kHz): +32dBu
- Phantom Input Impedance (1kHz): 2,210 ohms
- Output Impedance: 24.3 ohms (x2)
- Phantom Powering: +48V DC, (+/-2V DC)
- Dimensions: 1.5" W x 5.25" H x 6" D
- Shipping weight: 3 lbs.