On-Stage SS7746 Adjustable Speaker Pole with M20 Adapter
On-Stage SS7746 Adjustable Speaker Pole with M20 Adapter Reviews
The On-Stage Stands M20 thread sub pole is exactly what you need if you have a subwoofer with an M20 threaded pole mount. Unlike the older 1 3/8" socket design, the M20 concept will eliminate any wobble, making your set up even more secure. The On-Stage Stands M20 thread sub pole also features an all-steel shaft that telescopes from 30"-54" and is secured by a captive steel pin. With a zinc-plated threaded lug at the lower shaft, you get a very durable speaker pole for your subwoofer in the On-Stage Stands M20 thread sub pole.
New for
Absolutely Awesome!!
Secure, sturdy and well built. Fits my Behringer DR18SUB Subwoofer's and Electro-Voice 12 inch powered speakers perfectly, I highly recommend them.
Junk
The plastic collar breaks like clockwork. I've had two sets. Junk! Invest in an all steel set.
On-Stage SS7746 Speaker Pole
This adjustable speaker pole for putting your mid high speaker on top of your subwoofer, far exceeded my expectations. It completely eliminates the need to buy speaker tripods if you have subwoofers. I loved it. Be careful if you are in a high wind environment however because they may blow over. In my case 15-20 MPH wind gusts were threatening but the Mackie 15" subs anchored them we.
Speaker pole
Works good would buy again
knighttime61
Very good would buy again
Sturdy, basic speaker pole
I'm trying to offset some of the negative reviews here. This speaker pole works perfectly. Do not pay attention to the reviews of the locking knob stripping. It's clear those individuals were using that alone to hold the weight of the speaker. The threaded knob is only there to keep the speaker pole from SPINNING, not hold it up, which means it does not have to be crazy tight. OF COURSE the threaded knob will strip if you try to tighten it to hold a speaker. You MUST use the locking pin in one of the hole settings on the inner pole. THAT is what holds the speaker.
I have two of these and each one supports a 40 lb speaker with absolutely no issues.
look elsewhere, not very high quality
Item broke after one show. Just not as stable or tough for gigging.
On Stage Adjustable M20 Speaker Pole
This is a great product to use on your Subwoofer for adding your tops.
Works perfect!
Works perfect with QSC K-sub.
Very loose
I have JBL s and they both lean back enough to project sound more up than to the audience. I have customized the upper pole to help fit better but still leans back a little. We are going back to the stage tripods.
OnStage M20 Pole
Works great! I've read the other reviews and some people are making the mistake of not using the pin to hold the weight of the speaker, thereby over tightening the screw and stripping it. The pin should be holding the weight, then tighten the screw just enough to keep the pole from moving.
ROBERT MILLARD
AWFUL USED IT 3 X AND LOCK DIAL STRIPPED ! CANT SEPARATE OR LOWER POLE !
Poor construction
While it sits level in your subwoofer and appears strong, the plastic coupler clip is purely not up to par. It broke after about 3 uses and I had to resort to using the pin as the main holding mechanism. The tension twist-knob breaks off or doesn't hold the pole well. Disappointed.
Verify fit before ordering...
Good quality but the lower portion is 41mm diameter with a 20mm thread so it will not fit into a 35mm receiver. Using an Electrovoice ETX18-SP. My mistake on ordering, not problem with product
Sub Pole Perfect
Fits my JBL PRX715 XLF sub perfectly. Sturdy. Satisfied.
Works great!
Works just like it should. Threads nice and tight into an M20 bracket.
Have Questions About the SS7746 Adjustable Speaker Pole with M20 Adapter?
Or call us at (800) 222-4700
Sweetwater's Sales Engineers are regarded as the most experienced and knowledgeable professionals in the music industry, with extensive music backgrounds and intense training on the latest products and technologies. They are available to offer you personalized product advice any time you need it.
