If you are wanting this booster to make a pedal level with the board, it does NOT do this. It will be more level with the ground and not in relation to the board, thus the pedals will be angled toward the back (away from you) and not simply level.

Cheap and perfect size to hold two normal size pedals or one larger pedal and one smaller pedal. I ordered this at the same time as a Pitchblack mini tuner and slapped the rubber feet from the tuner pedal onto the bottom of this riser so it won't scoot around and used the provided velcro. Now I've got the only two pedals I need and it fits in the outer pocket of a mono classic guitar bag with two cables and a 1spot. I tend to play single channel amps with reverb and trem on board, so this gives me a second gain stage, some slap back, and keeps me in tune. Can't recommend it enough. Perfect grab and go board for most gigs.

I picked this up to make a really really small travel pedalboard. Just enough room to hold my tuner and an OD. I riveted some rubber feet to the bottom of this riser and now it's a smaller than Nano board. It fits in a Nano bag with my wires and I can throw the whole thing in a suitcase for flying to out of town shows.

When I first took these boosters out of their packaging I was impressed with how solid they felt. Definitely worth the money. It's a simple set-up. Velcro and screws are already included, which allowed me to strap these to my board in about 10 minutes. They really do keep you from kicking the knobs on your lower pedals. I would definitely recommend these to anyone with an inclined pedalboard.

Simple solutions are usually best and this thing does exactly what it is intended for without breaking the bank. Velcro is sufficient—I have a couple different sizes now on both my small and standard pedal boards.

I have a wireless unit on my Pedaltrain pedalboard and since it's flat to the board, I can't see the readout (hours and min remaining on transmitter battery) very well. This is just what I've needed. Easy install and the board is complete. This is the perfect size for the unit and couldn't be happier.

I knew I had to get it but I delayed it for a while. As soon as I put it on and mounted my delay and reverb (which I turn on and off constantly while playing live)... YES! Simple to install and so effective

I purchased this because I was having trouble placing my Strymon Timeline somewhere that was suitable to my signal chain as well as being reachable without bumping knobs on other pedals. This booster provides a good bump in height without being too tall and I can now use the foot switches on my Timeline without worrying about inadvertently changing settings on my other pedals. For what it's worth, the Timeline's dimensions are 6.75"x5.1" and it fits perfectly on this booster.

I had to raise my Line 6 DL4 because my ProCo Rat was sitting right below it. The fit wasn't perfect because a good inch of the DL4 sticks out on each side. However, it's sturdy and it gets the job done. A better fit would have been 2 small boosters, but that would cost more. Not perfect, but I am more than satisfied.

I have a Boss RC-20XL Loop Station on my board which I need to be able to stomp QUICK. I got the medium sized booster. My pedal fits perfectly on it and it has worked out great. No complaints.