The Easy Way to Control Your Lighting Remotely
The ENTTEC ODE POE Mk2 is a feature-packed Ethernet/DMX interface with industry-standard performance. It supports multiple protocols and connects to your existing router with ease. It supports IEEE 802.3af to provide Power over Ethernet. It also supports either LTP or HTP merging for up to two sources, as well as RDM over Art-Net. Choose Input mode to receive DMX and send it over Ethernet, or Output mode to send DMX. And everything is configurable via an easy-to-use web-based interface. The ODE POE Mk2 is the easy way to control your lighting remotely.
Related Videos: ODE POE Mk2 1-Port DMX Ethernet Gateway with PoE
Supports Power over Ethernet
The ODE POE Mk2 supports IEEE 802.3af to provide Power over Ethernet (PoE). This means that it passes electrical power along with DMX data. You get fewer wires, and fewer wires mean less mess. A PoE Injector or router is required to supply power over Ethernet, unless you add ENTTEC's optional 7V power supply.
The Swiss army knife of lighting interfaces
The ODE POE Mk2 supports an array of protocols, including Art-Net 1/2/3, ACN, sACN, and ESP. It can transmit Remote Device Management (RDM) over Art-Net, and supports LTP or HTP merging for up to two sources. You can also choose between Input mode (receives DMX and sends over Ethernet) or Output mode (sends DMX). Whatever it is that you're trying to accomplish, chances are the ODE POE Mk2 can do it.
Ready to connect and easy to set up
The ODE POE Mk2 uses DHCP IP addressing, so all you have to do is connect it to your existing router and any supported software will find it. Setup is a breeze using your browser and an intuitive web-based configuration — just click a few buttons, and you're ready to go. The ODE POE Mk2 is compatible with a wide range of controller apps for Mac, Windows, iOS, and Android devices.
Compatible Apps:
- Art-Net Controller (Android)
- ArtNetDmxRemote (iOS)
- Aurora DMX (Android)
- Chameleon (Mac)
- D-PRO (Mac/Windows)
- ELM ENTTEC LED Mapper (Windows)
- Freestyler (Windows)
- Jinx! LED Matrix Control (Windows)
- LXConsole (Mac)
- LightFactory (Windows)
- LightForge (Windows)
- LightJams (Windows)
- Lightkey (Mac)
- Luminair (iOS)
- MadMapper (Mac)
- QLC+ (Mac/Windows/Linux)
- Run The Show (iOS)
- TouchDesigner (Windows)
- Vibrio (iOS)
- VenueMagic (Windows)
ENTTEC ODE POE Mk2 Features
- Ethernet/DMX-512 interface with industry-standard performance
- Supports multiple protocols, including Art-Net 1/2/3, ACN, sACN, and ESP
- Supports IEEE 802.3af to provide Power over Ethernet
- Supports either LTP or HTP merging for up to two sources, as well as RDM over Art-Net
- Input mode receives DMX and sends it over Ethernet, while Output mode sends DMX
- Uses DHCP IP addressing for seamless connection to your existing router
- Everything is configurable via an easy-to-use web-based interface
- Compatible with a wide range of controller apps for Mac, Windows, iOS, and Android devices