LittLite 18X-4-LED 18" Gooseneck LED Lamp with 4-pin XLR Connector Reviews

OK, so before I ordered these, I ordered some cheapo generic gooseneck LED 4-pin lights from eBay.
All three of them failed to illuminate and they all caused my brand new just taken out of the box console to make repeating popping noises like it's tripping a breaker and resetting over and over again.
At first I thought my brand new console was defective, but then it dawned on me it might be those lights.
I removed them and the board worked perfectly. I also noticed that one of those lights would arc when plugged in or out.

So, I decided to spend a lot more money and get these 3 LittLite's from Sweetwater. Upon plugging them in, all three worked perfectly and did not cause that popping issue with my console.

The only gripe I have with them at all is I wish they had either an on/off switch or a dimmer, but at least they work like they're supposed to.

Just in case you're wondering, the generics cost me 77 bucks, and these LittLite cost 170 bucks. But, saving almost 100 dollars is worthless if they destroy brand new console. Don't buy generic lights from eBay, or anywhere else! Stick with brand name lights like these, and reputable vendors like Sweetwater.

Great product, nice and bright but not glaring.

This handy light performed just as advertised and works perfectly with our Behringer X32 mixing console. Good purchase!

Great! Very bright and easy to use

After attempting to save a few bucks, I tried a 25.00 alternative. Although it plugged in and lit.. it provided a very narrow beam and blocked access to the Ext. Mic input (L shape plug). I returned it to Amazon and purchased this for my X32. It is perfect. Great light, neat mix of Red and White light. Turn up the lamp control to about until about 60 percent and you get a nice dim but wide angle Red light. After 60 percent it goes White. Illuminating the entire board making easy to see and operate. This is the perfect light for the Behringer X32. I highly recommend it. I trust Sweetwater to deliver the best in quality at a fair price.

Works perfect with our Behringer X32 mixer. No switches or dimming control on light itself but mixer has dimming control for it. At low dimming level light goes to a red LED which is cool. White light at higher levels.

Love it. Just what my X32 needed...

I knew that this had a white LED, but I was suprised with a RED LED when the % of power (briteness) was turned down on my X32 board! Certainly a great feature, as it starts with Red and then brings in the white as you get past 60% or so.

A slick way to dispel the darkness. It has a solid feel, stays where you position it and the head rotates. The use of dual LEDs, one white, one red is especially cool. At lower levels of illumination only the red LED is used. As more light is needed and drive from the mixer increases, the white LED fades up as well. We haven't had occasion to use it in an actual night production yet, but a quick test has shown that it works just as it should.

Prompt delivery and it works perfectly with the X-32.

I had just installed my 3rd Behringer X32 in a church and thought how useful this light would be if the florescent overheads ever went out in the sound booth. Well they did before I was through with everything. So it paid to have a LittLite 18-4-LED right where it ought to be. I'm in Detroit, Mi. and most of if not all of my orders arrive next day from Sweetwater. Can't beat that anyway you Lite it up. Thanks Sweetwater.

It works as described; ours stays red until about 60% on our x32 (can't remember the exact percentages), then goes red/white the rest of the way until 90-100% when it goes full white. Nice and bright, a nifty tool to not only illuminate the board, but other things around the board (if necessary) with the goose neck. Just a heads up, if your sound board is elevated (we have a sort of "crows nest" configuration. For some reason.), be careful how you aim it, in case someone looks up (For some reason.) and is blinded.

I own a Behringer X32 and this light works great with it however my friend owns an M32 and the paint on the board is so dark that it basically absorbs the already not extremely bright led. It is a fantastic light if your board is lighter in color. I really like the feature that it dims to red for dark location unobtrusive use.

Great light, love the adjustable brightness and dual color.

The subject being the Behringer X32. This Gooseneck LED works wonders when we need the lighting in the church to go down so the members can read the video screen. Which allows me to still see what I'm doing. Great product. Wouldn't leave home with out it.

Works perfectly with my X32

works well, illuminates my mixing desk, but the red led's are too dark...I need blue or white