Mogami W2534 Quad Microphone Bulk Wire (Priced Per Foot) Reviews
Note: This is bulk cable only. Connectors sold separately.
Customer Reviews
Customer Added Media
This product doesn't have any review media yet!
Share Your Thoughts
Help other music gear aficionados by sharing your opinions of gear you've purchased.
Questions about the GoldMic?
Or call us at (800) 222-4700
Sweetwater's Sales Engineers are regarded as the most experienced and knowledgeable professionals in the music industry, with extensive music backgrounds and intense training on the latest products and technologies. They are available to offer you personalized product advice any time you need it.
Highest Rated Reviews
5
Very good cable
W2534 wiring
This configuration is also called "star-quad" configuration.
Both blue wires are to be connected to + pin 2
and both clear wires are to be connected to - pin 3
(This enhances common mode rejection for less noise.)
shield to pin 1
This is some of the best sounding microphone cable today
incredible performance
Signal through this cable is very accurate.
Which to solder with which
One of the reviews here complains that he can't figure out which wires to twist together at each end to avoid mixing up the pairs.
Twist the clear wires together at each end. You will still have to figure out what out do with the other wires yourself but at least you're half way home.
The Best
Man I couldn't wait till sweetwater finally get mogami cable So I don't have to go to GC no more. YES!. This is industry top choice Mic/Instrument cables. The sound of mogami cables is superb and will out beat any cable out there (MONSTER CABLES ARE TO HYPED AND OVER PRICED CRAPPY CABLES). Mogami gold has a lifetime warranty so you wont lose there. And also if you know how to solder your own cables. You will save a lot of money on these bad boys. So don't hesitate buy a lot of these cables and you good for life. As always Thank you to my sales engineer TONY DAYTON!. And thank you sweetwater for everything. You have a loyal customer for life.
Not Paired
I was hoping the wires were twisted in pairs so I could identify them. All four conductors are simple twisted as a group. This means you need to have both ends of your cable available with an ohmmeter in order to make sure the way you paired them on one end is the same as the other. If they used a unique color for each wire, that would not be necessary. As it is, you can't attach one end, then route the wire, then attach the other.
