Gator G-PRO-6U-13 Pro Series Shallow Rack Case Reviews

Great case. Sturdy buid.

Everything you'd expect - sturdy, useful, roomy, and surprisingly light!

Axe-Fx III fits just great and so far no issues

Gator cases for one of my guitars has been a great piece so I replaced a wooden road case with 4 slots to this one with 6. Its shallower so it doesn't take up as much space but has plenty of room for my effects and cables/power cords. Sturdy but lighter weight which makes moving it much less of a chore. Plus it looks good as well.

A solid and quality rack case that was perfect for my HAM radio Go Kit.

Great size for my mobile recording rig.

Good economical rack case

This case has protected our mixer, power conditioner, as well as a network switch and access point. We've lugged it around in the rain, in the heat, everywhere. If you need a shallow case, this one offers 12U of actual mounting points (6u per side). I don't think you can actually fill all 12U unless you are very meticulous w/ depth, but it's only listed as a 6u shallow, and it's very rigid. This case is good and assuming your rack mount units will fit inside, it's actually really convenient. It comes with enough bolts to mount 6u on both sides of the unit. Just be aware, it might come with plastic pellets deep inside the crevices, I had to shake mine out for a while to get all of the plastic extruder pellets out, hopefully that's an uncommon problem.

This case is perfect for my mobile DJ rig. It doesn't take up as much space as the 19" depth version but it still incredibly sturdy. I plan to buy more!

This helps organize equipment in the studio and is great for carrying it all around. Super-strong and solid yet not too hard to carry. Nice size. Shout out to the customer service guy who helped us figure out what size we needed and other details!

This case now houses my ElevenRack and my Line6 PODHX rack units. It is rugged and came with far more rack screws than I needed. I rate it so highly because it is ideal for my use.

Replaced a much larger rack case with this Gator case. So much easier to handle and takes up less space too in the van.
Can sit it up on end, leaving room for other equipment. This case is rock solid. Both front and back lids fit securely and the spring loaded twist latches assure the lids stay in place. Before I had to have help to unload and load my old road case, but, with this case I can do both by myself. Totally a back saver. Would highly recommend Gator cases.
If the lids were just a bit deeper so I could leave my aux. cable sends to amplifier hooked up from my digital mixer. Other than that, the case is perfect.

This case is a life saver as far as I'm concerned. Plus it's rock solid. I installed a Behringer XR-16 digital mixer and a Behringer Europower EPQ304 Power Amplifier (which all were purchased from SWEETWATER) in this case. Everything was easy to install. It looks really nice and now I dont have to have a second person to help carrying it from van to venue. I purchased a package of rack screws, but found out when I opened road case that Gator had supplied more than enough screws and washers inside. I just didnt see anything saying the case came with them.

The lids fit nice and tight with the spring loaded latches. Kinda wish the lids were a little deeper for clearance of cords that I normally leave plugged in. The handles are very comfortable. And with this smaller case it will save space by sitting on end. Very pleased with purchase.

Used for an Amateur Radio deployment kit. I couldn't be more pleased.

This is a lightweight quality built road case that protects your expensive investments. I purchased this case to protect my wedding ceremony mixing and microphone systems. It"s perfect and lightweight. I"ve been a long time and faithful user of Gator cases. You won"t go wrong with this exceptional product. Kudos to my sales representative Joel Helton for recommending this product!

I bought the shallow rack case recently to replace an old road case that I had bought second hand that was just extremely heavy on its own. Having switched to the Gator 6U Shallow case, it feels way easier to move around and take my gear wherever I need to go.

I got this to mount some power conditioners and rack effects. Mounting is easy, depth was perfect for my equipment, and the hardware seems good. Also looks like it will provide decent protection. Unfortunately the case itself has a bit of flex and when closed, the covers don't necessarily have the cleanest fit. As this will mostly be used in the studio and talent shows at my son's school, it will definitely get the job done; if I were to tour, I would probably consider something a bit more sturdy.

Gator 6U 13" deep rack - Very sturdy feeling case. Quality hardware. Not overly heavy. Covers have a reinforcement bar in them. So that's good. The not so good? The covers are not straight. The center bows out a bit and barely seals. I assume this bowing is from the blow molding process. While I'm not planning on submerging this in water, I think if a seal is designed into it, then it needs to work. I wouldn't trust this seal. Secondly, the rack rails are not even on either side or end. Obviously, not a huge deal, but all my components are slightly crooked in the case. I expected better from a company like Gator. I'm sure I'm being over critical on that point though.

I needed a 6U rack for an Axe FX 3, so this is the only lightweight rack (that I could find) that fits well. It's reasonably strong and perfect for hand-cary, etc., but I'd never dare put it on an airplane. The quality is reasonable, but weak in certain areas, e.g., some of the screw holes in the rail are not tapped very well. The latches look like they would smash off if hit sharply, but I don't think that's the point of this case: I think it's for gear that you will haul yourself, and for that, it's probably quite good. Aesthetically, the case is good.

It has a slit hole. Near one of the handles. Factory defect. Thin plastic wall on the side of the case. Not enough plastic reached the area during the manufacturing process. I just put plastic cement glue to cover the hole. I took picture with my camera but I'm not able to send it thru this review. Otherwise, it would have been perfect. It's exactly what I need. My amplifier fits perfectly too.