FetHead
FetHead was designed for a single purpose: to turbocharge your dynamic and ribbon mics. This in-line mic preamp uses Class A FET technology to deliver up to 27dB of clean boost. This nets you a cleaner signal, lower noise, greater sensitivity, and improved transient response. FetHead also isolates your ribbon mics from phantom power to safeguard against damage. If you want to get low-noise, squeaky clean performance out of your dynamics and ribbons, you need FetHead.
FetHead Germanium
FetHead Germanium is an in-line preamp with a NOS Germanium transistor that not only adds up to 29dB of clean gain to your dynamic and ribbon mics, but also imparts an ear-grabbing, vintage-tinged coloration to your signal. Here at Sweetwater, we’ve found FetHead Germanium to be the perfect antidote to sterile-sounding interface preamps. Like the original FetHead, FetHead Germanium isolates your ribbon mics from phantom power. If you want to maximize the performance of your dynamics and ribbons, while also injecting your recordings with analog character, the FetHead Germanium is the way to go.
BigAmp/BigAmp Piezo
BigAmp is a FET instrument preamp that employs a Class A amplifier to add up to 3dB of clean gain. This phantom-powered, in-line preamp works equally well with electric guitars and line-level sources like synthesizers. What’s more, BigAmp includes a low-impedance, balanced output buffer to ensure detailed, high-end sound quality. Beyond that, this phantom-powered device doesn’t require batteries, for the maximum in portability. Using a piezo-equipped instrument? No problem. BigAmp Piezo delivers the same performance as the original BigAmp but is designed to accommodate the ultra-high-impedance signals produced by piezo transducers.
FetHead Broadcast
FetHead Broadcast is a FetHead tailor-made for challenging live and broadcast environments. You get 23dB of clean boost, delivered by top-quality Class A FET technology, to drive long cables with low noise, outstanding sensitivity, and amazing transient response. This in-line preamp works with most microphones, and since it passes phantom power, it pairs well with condenser mics. For maximum performance over long cable runs, FetHead Broadcast is a no brainer.
FetHead Phantom
FetHead Phantom takes everything that's great about Triton Audio's other FetHead models and optimizes it for your condenser mics. This in-line mic preamp employs the same Class A FET technology as its siblings, arming you with up to 18dB of gain for your condensers. FetHead Phantom is an essential upgrade for camera microphones, and since it passes phantom power, it makes deploying your condenser mics a piece of cake.
Phantom Blocker
Phantom Blocker is all that stands between your priceless vintage ribbon microphone and potential annihilation. Installing this handy in-line device blocks phantom power on both the male and female sides of its XLR connector, all while passing your audio signal without restriction in either direction. If you want extra security for your ribbon mics and other fragile vintage gear, Phantom Blocker provides the reassurance you’re searching for.
NeoLev
NeoLev is a decoupling device that employs what Triton Audio calls a “magnetic levitation damper” to eliminate all physical contact between your studio monitors and your desk or monitor stands. This revolutionary device employs two repelling neodymium magnets, causing your speakers to actually float above their support surfaces. Thus, all unwanted vibrations, resonances, and acoustic feedback are eradicated. If you want to tighten the performance of your monitoring system, forego new speakers and get NeoLev instead!
