Used Audix Set of 3 fully functional used M1255B Miniature Cardioid Condenser Microphones w 25ft RFI shielded mini XLR to XLR

Really impressive little mics. If you‘re a place of worship w a choir, this should be a staple of the AV service team. 3 mics can cover quite a large group. I have 3 total, but the cables are ugly on the two (still fully functional).. Clean one is by itself in another listing if you just want one. I tried to paint the white cable black is the only thing on the other ones. Also new cables are not expensive. if hiding run, they work fine.

This also is awesome for tight drum spots, acoustics, spot mics for any woodwind,string,horn, HS band, good distant mic for amps etc.

The M1255B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, is designed with a very high sensitivity for distance miking. Applications include ceiling mount or table mount for conferencing, overhead choir miking, location recording, audience or room miking.

The M1255B has complete immunity from RF interference caused by cell phones and GSM devices. The M1255B is available in black or white (M1255B-W) with four polar patterns (cardioid, supercardioid, hypercardioid, and omni-directional), giving the microphone the unique ability to be used in a wide variety of live, studio and broadcast applications.

Features
Small, lightweight, low profile
Miniaturized integrated preamp circuitry
No external power adapter needed
12mm gold vapor diaphragm
Immune to RF interference
Extremely low noise, high sensitivity
Available with a cardioid, hypercardioid, omni or supercardioid capsule
Applications:
Overhead mic for choir, group vocal
Acoustic instruments
Ambient room miking
Symphonic area miking
Speech / presentation
Cymbals / Percussion
Supplied accessories:
25' cable with mini-XLRf - XLRm connectors (CBL-M25)
Order a verstile mini mic with RF interference immunity.

M1255B Miniturized High Output Condenser Microphone for Distance Miking Specifications:
Type: condenser
Polar Pattern: cardioid, supercardioid, hypercardioid, and omni-directional 
Frequency Response: 50Hz - 19kHz
Impedence: 150 Ohms
Sensitivity: 32 mV / Pa @ 1k 
Signal/Noise Ratio (A-weighted): 73 dB
Equivalent Noise Level (A-weighted): 21 dB 
Maximum SPL @ .5% THD : ‰130 dB 
Dynamic Range: 109 dB 
Power Requirements: 18 - 52 V 
Connector: 3 pin mini-XLRm 
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 
Housing / Finish Machined brass / Powder coat 
Weight 20 g / 0.7 ounces 
Length 54 mm / 2.1 inches