1) Insert a 1\/8 inch Stereo to (2) 1\/4 inch male ,Y cable into the Speaker Jack Output on the back of the Mac which goes to INPUTS 3+4 on the back of the Digi001 .<\/p>\n
2) Make sure that “built-in” is selected for “Output” in the Mac’s Sound Control Panel.<\/p>\n
3) Launch your current OMS setup (found in the “OMS Applications folder” ,which is in the “Opcode folder” on your Mac HD.<\/p>\n
4) Double Click on the QuickTime Musical Instruments Icon to enable the synth, and choose “ON”<\/p>\n
5) Now Save and Close the OMS Studio Setup.<\/p>\n
6) Now Restart the Computer.<\/p>\n
7) Now launch ProTools.<\/p>\n
8) Double Click on Metronome Icon on Transport Control<\/p>\n
9) Select QuickTime Music \/ Ch. 10 for “Output”<\/p>\n
10) Select D#1(side Stick) for accented notes .<\/p>\n
11) Select D#1 for unaccented notes.<\/p>\n
12) Now create a Stereo Aux Track in ProTools.<\/p>\n
13.Go to the Mix Window and set the Input for the Aux Track to “Analog 3+4”<\/p>\n
14.Now you will hear the Click Sound come through the Digi001.You can adjust the volume of the click with the Aux Track Fader!<\/p>\n
15.If you wish to Monitor the Click through the Mac (because you need the Analog Inputs for Something else, just Pull the 1\/8 inch plug from the back of the Mac, and it will come out of the internal Speaker.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[34125,34688],"storecat":[],"itemids":[20943],"manufacturers":[33300],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n