{"id":5039,"date":"2001-08-23T00:00:00","date_gmt":"2001-08-23T00:00:00","guid":{"rendered":"http:\/\/www.sweetwater.com\/sweetcare\/?p=5039"},"modified":"2012-04-17T17:02:34","modified_gmt":"2012-04-17T17:02:34","slug":"roland-re-initialization-routines","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/","title":{"rendered":"Roland RE-Initialization Routines"},"content":{"rendered":"<p>A-30 Power on while holding WRITE. (Hold for 15 seconds.)<\/p>\n<p>A-33 Power on while holding WRITE. (Hold for 15 seconds.)<\/p>\n<p>A-5O While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button<\/p>\n<p>A-80 While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button<\/p>\n<p>A-90 A-90 only; Power on while holding down EDIT, then press ENTER With Voice Expansion Board: Power on while holding down MANUAL, then press ENTER.<\/p>\n<p>A-220 Power on while holding B and MEMORY.<\/p>\n<p>A-880 Power on while holding SIGNAL and MEMORY<\/p>\n<p>ADA-8024 No ROM reset<\/p>\n<p>ALPHA JUNO-1 (Same as JUNO-i.) No ROM reset<\/p>\n<p>ALPHA JUNO-2 (Same as JUNO-i.) No ROM reset<\/p>\n<p>AP-7O0 Power on, then press EXIT repeatedly to get ANALYZER\/Filter screen. Cursor to MENU, press ENTER. Cursor to SYSTEM, press ENTER. Cursor to INITIALIZE, press ENTER. Use VALUE to select ALL. Select EXEC and press ENTER twice<\/p>\n<p>AR-Series No ROM reset.<\/p>\n<p>AT-Series Power on while holding ONE TOUCH PROGRAM.<\/p>\n<p>Ax-1 Power on while holding WRITE. (Hold for 30 seconds.)<\/p>\n<p>AXIS-1 While holding FUNCTION, press the F#0, C#2, and D#2 keys.<\/p>\n<p>CA-30 The CA-30 resets itself every time you turn it off and then on<\/p>\n<p>CR-80 Power on while holding DEL and REPEAT, then press ENTER.<\/p>\n<p>All Other CR No ROM reset.<\/p>\n<p>CSQ-Series No ROM reset.<\/p>\n<p>D-5 No ROM reset<\/p>\n<p>D-10 No ROM reset.<\/p>\n<p>D-20 No ROM reset<\/p>\n<p>D-50 No ROM reset<\/p>\n<p>D-70 No ROM reset<\/p>\n<p>D-110 No ROM reset<\/p>\n<p>D-550 No ROM reset<\/p>\n<p>DDR-30 Power on while holding the #1 button<\/p>\n<p>DEP-3 Power on while holding MEMORY NO UP and DOWN <\/p>\n<p>Dep-5 Power on while holding MEMORY NO UP and DOWN<\/p>\n<p>DJ-70 No ROM reset<\/p>\n<p>DJ-70mkII No ROM reset<\/p>\n<p>DM-Series No ROM reset<\/p>\n<p>DR-5 Power on while holding FRET LEFT(<) and RIGHT(>), and then press ENTER twice.<\/p>\n<p>DR-550 Power on while holding -1 and +1, then press START<\/p>\n<p>DR-550mkII Power on while holding -1 and +1, then press START<\/p>\n<p>DR-660 Press UTILITY, then use LEFT(<) and RIGHT(>)to select[8] INIT. Press ENTER twice<\/p>\n<p>DS-330 Power on while holding REVERB and SPLIT, then press YES<\/p>\n<p>E-5 No ROM reset<\/p>\n<p>E-10 Power on while holding WRITE<\/p>\n<p>E-12 No ROM reset<\/p>\n<p>E-14US The unit resets each time you turn it on.<\/p>\n<p>E-15 The unit resets each time you turn it on.<\/p>\n<p>E-16 The unit resets each time you turn it on.<\/p>\n<p>E-20 Power on while holding WRITE<\/p>\n<p>E-28US The unit resets each time you turn it on.<\/p>\n<p>E-30 Power on while holding WRITE<\/p>\n<p>E-35 Power on while holding REC\/PUNCH IN<\/p>\n<p>E-36 Power on while holding RECORDER<\/p>\n<p>E-38 The unit resets each time you turn it on.<\/p>\n<p>E-56 Power on while holding WRITE<\/p>\n<p>E-66 Power on while holding REC in the DISK RECORDER section<\/p>\n<p>E-68US Power on while holding WRITE<\/p>\n<p>E-70 Power on while holding WRITE<\/p>\n<p>E-86 Power on while holding WRITE<\/p>\n<p>E-96 Power on while holding WRITE<\/p>\n<p>EM-101 No ROM reset<\/p>\n<p>EM-303 The unit resets each time you turn it on.<\/p>\n<p>EM-305 The unit resets each time you turn it on.<\/p>\n<p>EP-3 The unit resets each time you turn it on.<\/p>\n<p>EP-5 While holding REC and PLAY, press STRINGS. Power off and then back on <br \/>again.<\/p>\n<p>EP-7 While holding REC and PLAY, press STRINGS. Power off and then back on <br \/>again.<\/p>\n<p>EP-7mkII While holding REC and PLAY, press STRINGS. Power off and then <br \/>back on again.<\/p>\n<p>EP-9 While holding REC and PLAY, press CHOIR. Power off and then back on again.<\/p>\n<p>EP-707 The unit resets each time you turn it on.<br \/>All other EP No ROM reset<\/p>\n<p>FC-100 No ROM reset<\/p>\n<p>FC-100mkII Power on while holding pedals #1, #2, and #8<\/p>\n<p>FC-200 Power on while holding the #10 pedal, then press the CTL pedal.<\/p>\n<p>FG-10 Power on while holding CLEAR and EXIT<\/p>\n<p>FG-1000 Power on while holding CLEAR and EXIT<\/p>\n<p>FP-1 The unit resets each time you turn it on.<\/p>\n<p>FP-8 Press FUNC and release. While holding PIANO and press FUNC again.<\/p>\n<p>G-800 Power on while holding WRITE<\/p>\n<p>GC-8 No ROM reset<\/p>\n<p>GI-10 Power on while holding PARAMETER + and -, then press VALUE +<\/p>\n<p>GM-70 Poly Mode: Power on while holding PLAY, GENERAL EDIT, and IND EDIT. <br \/>Mono Mode: Power on while holding TUNE, CONTROL ASSIGN, and DATA <br \/>TRANSFER.<\/p>\n<p>GP-8 No ROM reset.<\/p>\n<p>GP-16 GP-16 Power on while holding the #6, #7, and #8 buttons. Use the <br \/>FUNCTION LEFT (<) and RIGHT (>) buttons to select &#8220;2. All Factory Preset&#8221; then <br \/>press WRITE three times.<\/p>\n<p>GP-100 Power on while pressing in the PARAMETER knob, then press WRITE.<\/p>\n<p>GR-09 Power on while holding Pedal #2, then press the VALUE + button. Now <br \/>press EDIT\/PLAY. <\/p>\n<p>GR-1 GR-1 Power on while holding WRITE\/ COPY, then press YES.<\/p>\n<p>GR-30 Power on while holding Pedal #2,then press the PATCH+ button to select <br \/>INI. Press EDIT\/PLAY. Then press PATCH+ and PATCH- simultaneously.<\/p>\n<p>All other GR No ROM reset<\/p>\n<p>GS-6 No ROM reset<\/p>\n<p>GT-5 Power on while holding MOD and FEED BACKER\/SLOW GEAR. Press <br \/>WRITE.<\/p>\n<p>GX-700 Press TUNER\/UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) buttons <br \/>to select FACT INIT. Cursor to left and dial SYSTEM, then right and dial P#100. Press <br \/>WRITE, then TUNER\/ UTILITY.<\/p>\n<p>HP-100 (Same as PIANO PLUS-100.) No ROM reset.<\/p>\n<p>HP-300 (Same as PIANO PLUS-300.) No ROM reset.<\/p>\n<p>HP-4OO (Same as PIANO PLUSAOO.) No ROM reset<\/p>\n<p>All Other HP (Some also the same as PIANO PLUS-Series.) The unit resets each <br \/>time you turn it on.<\/p>\n<p>HS-Series No ROM reset<\/p>\n<p>JD-800 Press DATA TRANSFER. Use PAGE UP and DOWN to select FACTORY <br \/>PRESET. Press YES.<\/p>\n<p>JD-990 While holding EXIT, press UTILITY. Press F6 (EXECUTE), then F5 (YES).<\/p>\n<p>JP6 (Same as JUPITER-6.) No ROM reset.<\/p>\n<p>JP-8 (Same as JUPITER-8.) No ROM reset<\/p>\n<p>JP-8000 While holding SHIFT, press UNIT\/ UTIL. Press INIT\/UTIL repeatedly <br \/>to select INITIALIZE WRITE. Use the DOWN\/UP buttons to select FACTORY <br \/>PRESET, then press WRITE<\/p>\n<p>JS-30 Power on while holding RECORD located in the SEQUENCER section.<\/p>\n<p>JUNO-1 (Same as ALPHA JUNO-1.) No ROM reset<\/p>\n<p>JUNO-2 (Same as ALPHA JUNO-2.) No ROM reset<\/p>\n<p>JUNO-6 No ROM reset<\/p>\n<p>JUNO-60. No ROM reset<\/p>\n<p>JUNO-106 No ROM reset.<\/p>\n<p>JUPITER-6 (Same as JP-6.) No ROM reset<\/p>\n<p>JUPITER-8 (Same as JP-8.) No ROM reset.<\/p>\n<p>JV-30 Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press <br \/>VALUE Up.<\/p>\n<p>JV-35 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and <br \/>DOWN to select ALL. Press VALUE UP <\/p>\n<p>JV-50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and <br \/>DOWN to select ALL. Press VALUE UP <\/p>\n<p>JV-80 Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). <br \/>Press ENTER and then press WRITE.<\/p>\n<p>JV-90 Power on while holding NUMBER B (also labeled PERFORM 16 and CAPS). <br \/>Press ENTER and then press WRITE.<\/p>\n<p>JV-880 Press UTILITY, then use the DATA dial to select FACTORY PRESET. Press <br \/>ENTER twice<\/p>\n<p>JV-l000 Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). <br \/>Press ENTER, then press WRITE<\/p>\n<p>JV- 1080 Press UTILITY. Cursor down once, then cursor right three times to <br \/>select FACTORY PRESET. Press ENTER twice, then press UTILITY.<\/p>\n<p>JV-2080 Press UTILITY. Press F6 twice to select MENU 3. Press Fl. Then <br \/>press F6. If necessary, use the VALUE DIAL to turn Memory Protect OFF and press <br \/>F6 twice.<\/p>\n<p>JW-50 Press TUNE\/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then <br \/>F3 (GS RESET), then F4 (YES)<\/p>\n<p>Jx-1 Power on while holding WRITE and FLUTE.<\/p>\n<p>JX-3P No ROM reset.<\/p>\n<p>JX-8P No ROM reset.<\/p>\n<p>JX-10 (Same as SUPER ix keyboard.) No ROM reset<\/p>\n<p>KR-33 The unit resets each time you turn it on.<\/p>\n<p>KR-55 Hold MIDIIFUNC and press CARD. Hold both VARIATION buttons for 5 <br \/>seconds.<\/p>\n<p>KR-100 The unit resets each time you turn it on.<\/p>\n<p>KR-350 While holding LOAD and SAVE, press WRITE.<\/p>\n<p>KR-370 The unit resets each time you turn it on.<\/p>\n<p>KR-500 While holding FROM and TO, press WRITE.<\/p>\n<p>KR-570 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons <br \/>(Composer section) simultaneously. Press PART VOLUME ACCOMP repeatedly to <br \/>get FACTORY SETUP LOAD in the window. After loading is complete, power oft and <br \/>then back on. <\/p>\n<p>KR-650 While holding LOAD and SAVE, press WRITE.<\/p>\n<p>KR-770 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons <br \/>(Composer section) simultaneously. Press PART VOLUME ACCOMP repeatedly to <br \/>get FACTORY SETUP LOAD in the window. After loading is complete, power off and <br \/>then back on. <\/p>\n<p>KR-3000 While holding FROM and TO, press WRITE<\/p>\n<p>KR-3500 While holding LOAD and SAVE, press WRITE.<\/p>\n<p>KR-4500 While holding LOAD and SAVE, press WRITE.<\/p>\n<p>KR-47OO While holding EDIT, press LOAD and SAVE.<\/p>\n<p>KR-5000 While holding EDlT, press LOAD and SAVE.<\/p>\n<p>KR-5500 While holding LOAD and SAVE, press WRITE.<\/p>\n<p>LVC-1N Power on while holding ENTER<\/p>\n<p>M-660 (Same as RHODES 660.) While holding EDIT, press WRITE. Use <br \/>PARAMETER UP and DOWN to select ALL, then press WRITE. When completed, <br \/>press EDIT to return to Play Mode. <\/p>\n<p>M-760 (Same as RHODES 760.) While holding EDIT, press WRITE. Use <br \/>PARAMETER UP and DOWN to select ALL, then press WRITE. When completed, <br \/>press EDIT to return to Play Mode.<\/p>\n<p>M-BD1 Power on while holding F3.<\/p>\n<p>M-DC1 Power on while holding F3.<\/p>\n<p>M-GS64 Power on while holding F3.<\/p>\n<p>M-OC1 Power on while holding F3.<\/p>\n<p>M-SE1 Power on while holding F3.<\/p>\n<p>M-VS1 Power on while holding F3.<\/p>\n<p>MC-303 Power on while holding down SHIFT and press ENTER<\/p>\n<p>All Other MC No ROM reset<\/p>\n<p>ME-5 Power on while holding pedals #1 and #2, then press WRITE immediately<\/p>\n<p>ME-6 Power on while holding LEFT and DOWN, then press WRITE<\/p>\n<p>ME-6B Power on while holding LEFT and DOWN, then press WRITE<\/p>\n<p>ME-8 Power on while holding LEFT and DOWN, then press WRITE\/COPY.<\/p>\n<p>ME-8B Power on while holding PARAMETER LEFT (<) and DOWN, then press <br \/>WRITE\/COPY <\/p>\n<p>ME-10 Power on while holding the BANK DOWN pedal, then press WRITE.<\/p>\n<p>ME-X Power on while holding PARAMETER DOWN and LEFT (<), then press <br \/>WRITE.<\/p>\n<p>MK-60 (Same as RHODES MK-60.) No ROM reset.<\/p>\n<p>MK-80 (Same as RHODES MK-80.) While holding WRITE, press EDIT. While <br \/>holding the LEFT (<) and RIGHT (>) cursor buttons, press UP <\/p>\n<p>MKB-Series No ROM reset<\/p>\n<p>MKS-50 Poly Mode: Power on while holding NUMBER 4 and 8. Mono Mode: <br \/>Power on while holding NUMBER 3 and 7.<\/p>\n<p>All Other MKS No ROM reset.<\/p>\n<p>MP-Series No ROM reset.<\/p>\n<p>MS-1 No ROM reset.<\/p>\n<p>MSQ-100 No ROM reset<\/p>\n<p>MSQ-700 No ROM reset.<\/p>\n<p>MT-32 While holding MASTER VOLUME, press RHYTHM PART. Press PART 1.<\/p>\n<p>MT-80 The unit resets each time you turn it on.<\/p>\n<p>MT-100 While holding STOP, press DELETE. After the display flashes ALL CLEAR, <br \/>press EXECUTE.<\/p>\n<p>MT-120 Power on while holding REPEAT, SONG (blue button), and PLAY. Press <br \/>FWD repeatedly, until the window reads T-13. Press PLAY, then press REC. Power <br \/>oft, then on.<\/p>\n<p>MT-120s Power on while holding REPEAT, SONG (blue button), and PLAY. <br \/>Press FWD repeatedly, until the window reads T-13. Press PLAY, then press REQ. <br \/>Power off, then on.<\/p>\n<p>MT-200 Power on while holding REPEAT, SONG (blue button), and PLAY. Use the <br \/>DIAL to select T-15 in the window. Press PLAY, then press REC. Power off, then on.<\/p>\n<p>MV-30 (Same as STUDIO M.) No ROM reset<\/p>\n<p>OCTAPAD (Same as PAD-8.) Power on while holding MIDI CH and NOTE <br \/>NUMBER. Power off and then back on.<\/p>\n<p>OCTAPAD II (Same as PAD-80.) Power on while holding both VALUE (solid <br \/><and>) buttons.<\/p>\n<p>P-55 Power on while holding both INSTRUMENT buttons, then press PARAM 1.<\/p>\n<p>P-330 No ROM reset.<\/p>\n<p>PAD-8 (Same as OCTAPAD.) Power on while holding MIDI CH and NOTE NUMBER. <br \/>Power off, then back on.<\/p>\n<p>PAD-80 (Same as OCTAPAD 11.) Power on while holding both VALUE (solid <br \/><and>) buttons.<\/p>\n<p>PC-150 Power on while holding COMMAND on the left edge of the keyboard.<\/p>\n<p>PC-200 Power on while holding the two buttons under the word STANDARD.<\/p>\n<p>PC-2OOmkII Power on while holding the two buttons under the word <br \/>STANDARD.<\/p>\n<p>All PIANO PLUS (Same as some of the HP-Series.) No ROM reset<\/p>\n<p>PK-5 Power on while holding OCT\/PARAM<\/p>\n<p>PLANET-P (Same as MKS-iO.) No ROM reset<\/p>\n<p>PLANET-S (Same as MKS-30.) No ROM reset.<\/p>\n<p>PM-16 Power on while holding NUMBER buttons 1 and 2. (This reloads the first <br \/>BANK of settings.)<\/p>\n<p>PMA-5 Press UTILITY, then press the RIGHT (>) cursor button repeatedly to select <br \/>INITIALIZE.Press ENTER, then [EXEC].<\/p>\n<p>PR-1OO The unit resets each time you turn it on.<\/p>\n<p>PRO-E Power on while holding WRITE<\/p>\n<p>R-5 Power on while holding CURSOR PAGE and PARAM SELECT, then press <br \/>ENTER twice.<\/p>\n<p>R-8 Power on while holding CURSOR PAGE and PARAM SELECT, then press <br \/>ENTER twice<\/p>\n<p>R-8mkII  Power on while holding CURSOR PAGE and PARAM SELECT, then press <br \/>ENTER twice.<\/p>\n<p>R-8M Power on while holding ENTER and the RIGHT (>) CURSOR button, then <br \/>press ENTER twice.<\/p>\n<p>R-70 Power on while holding MIDl and ASSIGN, then press YES twice.<\/p>\n<p>R-880 No ROM reset.<\/p>\n<p>RA-30 The unit resets each time you turn it on.<\/p>\n<p>RA-5O Power on while holding WRITE<\/p>\n<p>RA-90 Power on while holding WRITE<\/p>\n<p>RA-95 Power on while holding REQ<\/p>\n<p>RA-800 (WARNING: This will erase the original factory Performance settings. <br \/>However, you can save them to disk before doing this procedure.) Power on while <br \/>holding WRITE. <\/p>\n<p>RD-500 Power on while holding NUMBER 1 and 8. Press DEC\/YES.<\/p>\n<p>RD6OO Press EDIT. Press the RIGHT PAGE button until &#8220;Initialize: All&#8221; is <br \/>displayed. Press INC\/YES twice. Press EDIT to return to Play mode.<\/p>\n<p>All Other RD No ROM reset.<\/p>\n<p>RHODES 660 (Same as M-760.) While holding EDIT, press WRITE. Use <br \/>PARAMETER UP and DOWN (v) to select ALL, then press WRITE. When <br \/>completed, press EDIT to return to Play Mode.<\/p>\n<p>RHODES 760 (Same as M-760.) While holding EDIT, press WRITE. Use <br \/>PARAMETER UP and DOWN (v) to select ALL, then press WRITE. When <br \/>completed, press EDIT to return to Play Mode.<\/p>\n<p>RHODES MK-60 Same as MK-6O.) No ROM reset<\/p>\n<p>RHODES MK-80 (Same as MK-80.) While holding WRITE, press EDIT. While <br \/>holding the LEFT (<) and RIGHT (>) cursor buttons, press UP. <\/p>\n<p>RSP-550 Power on while holding PROGRAM\/PAGE UP and DOWN, then <br \/>press WRITE.<\/p>\n<p>RSS-1O Power on while holding LOCK and OPTION. (The MCR-8 LED <br \/>lights.) Press DEMO PROGRAM four times. Press DEVICE ID<\/p>\n<p>RSS-8048 No ROM reset<\/p>\n<p>RV-70 Power on while holding WRITE and DOWN. Use the UP and DOWN buttons <br \/>to select AL. Press WRlTE. Power off, then back on<\/p>\n<p>SB-55 Power on while holding CLEAR.<\/p>\n<p>SBX-100O No ROM reset.<\/p>\n<p>S-Series No ROM reset<\/p>\n<p>SC-7 The unit resets each time you turn it on.<\/p>\n<p>SC-33 Power on while holding REVERB and SPLlT, then press YES.<\/p>\n<p>SC-5O Power on while holding both INSTRUMENT buttons, then press ALL.<\/p>\n<p>SC-55 Power on while holding both INSTRUMENT buttons, then press ALL.<\/p>\n<p>SC-55mk11 Power on while holding both INSTRUMENT buttons, then press <br \/>ALL.<\/p>\n<p>SC-88 While holding SELECT, press both INSTRUMENT buttons. Press ALL.<\/p>\n<p>SC-155 Power on while holding both INSTRUMENT buttons, then press ALL.<\/p>\n<p>SCC-700C No ROM reset.<\/p>\n<p>SD-35 Power on while holding CLEAR, then press REC.<\/p>\n<p>SDD-320 No ROM reset.<\/p>\n<p>SDE-330 Power on while holding SYSTEM and PROGRAM. Use the DATA <br \/>dial to select SYSTEM + PROGRAM. Press MEMORY.<\/p>\n<p>All Other SDE No ROM reset<\/p>\n<p>SDX-330 Power on while holding SYSTEM and PROGRAM. Use the DATA <br \/>dial to select SYSTEM + PROGRAM. Press MEMORY.<\/p>\n<p>SE-5O Power on while holding PARAM UP (A) and VALUE UP. Press WRITE. Wait <br \/>three seconds and press WRITE again.<\/p>\n<p>SE-70 Power on while holding in the NUMBER\/VALUE knob. Press PARAMETER <br \/>LEFT (<), then dial to STANDARD mode or GUITAR mode. Press WRITE. \n\nSH-Series No ROM reset.\n\nSN-700 No ROM reset.\n\nSP-700 No ROM reset\n\nSPD-8 Power on while holding EDIT, then press COPY. Use the VALUE UP and <br \/>DOWN to select F A L in the window. Press ALL\/ENTER.<\/p>\n<p>SPD-11 Power on while holding ALL\/ENTER and DOWN (the solid v). Press <br \/>ALL\/ENTER again<\/p>\n<p>SRC-2 No ROM reset.<\/p>\n<p>SRV-330 Power on while holding SYSTEM and PROGRAM. Use the DATA <br \/>dial to select SYSTEM + PROGRAM. Press MEMORY.<\/p>\n<p>SRV-1OOO No ROM reset.<\/p>\n<p>SRV-2000 Factory; Power on while holding WRITE and REVERB <br \/>NON-LINEAR.Delay Mode: Power on while holding WRITE, REVERB NON-LINEAR <br \/>and ROOM SIMULATE.<\/p>\n<p>SSC-8004 No ROM reset<\/p>\n<p>STUDIO M (Same as MV-30.) No ROM reset<\/p>\n<p>SUPER JUPITER (Same as MKS-80.) No ROM reset<\/p>\n<p>SUPER JX keybrd (Same as JX-1O.) No ROM reset.<\/p>\n<p>SUPER JX module (Same as MKS-70.) No ROM reset.<\/p>\n<p>SUPER QUARTET (Same as MKS-7.) No ROM reset.<\/p>\n<p>All SYNTH PLUS (Same as HS-Series.) No ROM reset.<\/p>\n<p>SX-700 Press UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) to select FACT <br \/>INIT. Press WRITE.<\/p>\n<p>TB-303 No ROM reset<\/p>\n<p>TD-5 Power on while holding EDIT and START\/STOP, then press START\/STOP <br \/>again.<\/p>\n<p>TD-7 Press SYSTEM. Use the LEFT (<) and RIGHT (>) CURSOR buttons to select <br \/>INI, then press ENTER. Cursor to HI HAT and use the DATA dial td select ALL. Press <br \/>ENTER twice. <\/p>\n<p>TD-1O Press SETUP, then press F4 three times.<\/p>\n<p>TL-Series No ROM reset<\/p>\n<p>TP-20 No ROM reset<\/p>\n<p>TR-505 Power on while holding MODE and PATTERN GROUP KEY A.<\/p>\n<p>TR-626 Power on while holding MODE and TRACK #1.<\/p>\n<p>TR-707 Power on while holding TRACKWRITE and PATTERN #1<\/p>\n<p>TR-727 Power on while holding TRACKWRITE and PATTERN #1<\/p>\n<p>TR-808 No ROM reset.<\/p>\n<p>TR-909 Power on while holding TRACK#1 and PATTERN #1<\/p>\n<p>U-20 No ROM reset.<\/p>\n<p>U-110 Power on while holding PART and EDIT.<\/p>\n<p>U-220 No ROM reset.<\/p>\n<p>VG-8 Power on while holding Fl, F31 and F5. Press F6 for All, F4 for Patches, or <br \/>F2 for System<\/p>\n<p>VK-1000 Press WRITE, then press F3 to access the INIT MENU screen. Press <br \/>F4 to access the COLD BOOT screen, then press ENTER<\/p>\n<p>VP-70 Power on while holding PLAY, VOICE EXPANSION, and MIDI.<\/p>\n<p>VS-880 No ROM reset<\/p>\n<p>VT-I Power on while holding down the PRESET\/USER button.<\/p>\n<p>W-30 No ROM reset<\/p>\n<p>W-50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and <br \/>DOWN to select ALL. Press VALUE UP <\/p>\n<p>XP-10 Press UTILITY. Use VALUE + and &#8211; to select INITIALIZE, then press ENTER. <br \/>Use VALUE + and &#8211; to select FACTORY PRESET, then press ENTER.<\/p>\n<p>XP-50 Press DISK\/UTILITY, select SOUND, select PRESET, then press ENTER. <br \/>Use the dial to turn Memory Protect OFF if necessary, then press ENTER twice.<\/p>\n<p>XP-80 Press UTILITY, press F6 (MENU) twice to select Factory, then ENTER. Press <br \/>F6 (EXECUTE). Use the dial to turn Memory Protect OFF if necessary, press ENTER, <br \/>then press F6 (EXECUTE).<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[34846,34847,33970],"storecat":[],"itemids":[],"manufacturers":[],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v17.9 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<meta name=\"description\" content=\"Check out the Roland RE-Initialization Routines page at Sweetwater \u2014 the world&#039;s leading music technology and instrument retailer!\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Roland RE-Initialization Routines - SweetCare\" \/>\n<meta property=\"og:description\" content=\"A-30 Power on while holding WRITE. (Hold for 15 seconds.) A-33 Power on while holding WRITE. (Hold for 15 seconds.) A-5O While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button A-80 While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/\" \/>\n<meta property=\"og:site_name\" content=\"SweetCare\" \/>\n<meta property=\"article:modified_time\" content=\"2012-04-17T17:02:34+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"10 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.sweetwater.com\/sweetcare\/#website\",\"url\":\"https:\/\/www.sweetwater.com\/sweetcare\/\",\"name\":\"SweetCare\",\"description\":\"Service and Support\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.sweetwater.com\/sweetcare\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/#webpage\",\"url\":\"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/\",\"name\":\"Roland RE-Initialization Routines - SweetCare\",\"isPartOf\":{\"@id\":\"https:\/\/www.sweetwater.com\/sweetcare\/#website\"},\"datePublished\":\"2001-08-23T00:00:00+00:00\",\"dateModified\":\"2012-04-17T17:02:34+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.sweetwater.com\/sweetcare\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Articles\",\"item\":\"https:\/\/www.sweetwater.com\/sweetcare\/articles\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Roland RE-Initialization Routines\"}]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"description":"Check out the Roland RE-Initialization Routines page at Sweetwater \u2014 the world's leading music technology and instrument retailer!","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/","og_locale":"en_US","og_type":"article","og_title":"Roland RE-Initialization Routines - SweetCare","og_description":"A-30 Power on while holding WRITE. (Hold for 15 seconds.) A-33 Power on while holding WRITE. (Hold for 15 seconds.) A-5O While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button A-80 While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press [&hellip;]","og_url":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/","og_site_name":"SweetCare","article_modified_time":"2012-04-17T17:02:34+00:00","twitter_card":"summary","twitter_misc":{"Est. reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebSite","@id":"https:\/\/www.sweetwater.com\/sweetcare\/#website","url":"https:\/\/www.sweetwater.com\/sweetcare\/","name":"SweetCare","description":"Service and Support","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.sweetwater.com\/sweetcare\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/#webpage","url":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/","name":"Roland RE-Initialization Routines - SweetCare","isPartOf":{"@id":"https:\/\/www.sweetwater.com\/sweetcare\/#website"},"datePublished":"2001-08-23T00:00:00+00:00","dateModified":"2012-04-17T17:02:34+00:00","breadcrumb":{"@id":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/roland-re-initialization-routines\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.sweetwater.com\/sweetcare\/"},{"@type":"ListItem","position":2,"name":"Articles","item":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/"},{"@type":"ListItem","position":3,"name":"Roland RE-Initialization Routines"}]}]}},"_links":{"self":[{"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/articles\/5039"}],"collection":[{"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/articles"}],"about":[{"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/types\/articles"}],"version-history":[{"count":1,"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/articles\/5039\/revisions"}],"predecessor-version":[{"id":1715111,"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/articles\/5039\/revisions\/1715111"}],"wp:attachment":[{"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/media?parent=5039"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/categories?post=5039"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/tags?post=5039"},{"taxonomy":"storecat","embeddable":true,"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/storecat?post=5039"},{"taxonomy":"itemids","embeddable":true,"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/itemids?post=5039"},{"taxonomy":"manufacturers","embeddable":true,"href":"https:\/\/www.sweetwater.com\/sweetcare\/wp-json\/wp\/v2\/manufacturers?post=5039"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}