To use your 888\/24 as a ‘stand alone’ 24 bit Analog-Digital or Digital-Analog converter: <\/p>\n
1.Quit Pro Tools if it is launched. <\/p>\n
2.For Analog-Digital conversion, be sure to disconnect or turn off any external digital devices (DAT machines, effects processors, etc.) that may be providing word clock information to the 888\/24’s AES\/EBU or S\/PDIF channel 1 & 2 inputs.<\/p>\n
3.An AES\/EBU (or S\/PDIF – see below) word clock signal is necessary for Digital-Analog conversion in Stand Alone mode. Be sure to have a digital device providing word clock connected to the AES\/EBU inputs 1 & 2 of the 888\/24 interface. <\/p>\n
4.In Stand Alone mode, the 888\/24’s default word clock input port is AES\/EBU, unless changed to S\/PDIF via the corresponding internal jumper setting. Please refer to the 888\/24 I\/O Installation Guide for specific instructions and guidance.<\/p>\n
To verify that the 888\/24 is in Stand Alone mode:<\/p>\n
1.Check to see that the “analog” LED display for meters 1 & 2 is flashing. The LED flashes between a half-lit state to full display.<\/p>\n
2.Turn off your CPU. <\/p>\n
<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[18533],"manufacturers":[33300],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n