Compatiblity requires software version 1.21 or higher on both S5000 & S6000<\/p>\n
CD-ROM drives:
– Pioneer 35x model DR-766
– Plextor 40x model PX40TS *
– Teac 32x model CD-532S **<\/p>\n
CD-R\/RW Drives ALL listed supported as CD-ROM drives only. CD writing is not supported.
– Melco 32x model CDRW-S8432
– Plextor 20x model PX-820Te
– Plextor 20x model PX-W8220Te
– Plextor 32x model PX-W124Tse
– Plextor 32x model PX-W12432Te
– Ricoh 24x model RW7060S
– Sanyo 32x model CDR-BP3 <\/p>\n
FIXED SCSI DRIVES (OK’d as internal drives as well)
– IBM 4.5 GB model DDRS-3456OU version S97B
– Seagate 4.5 GB model ST34520N version 1281<\/p>\n
FIXED IDE DRIVES – OK as internal drives but require the optional IB-ID2SC IDE-to-SCSI converter board.
– Fujitsu 10 GB model MPE3102AP
– Fujitsu 10 GB model MPF3012AP
– Fujitsu 20 GB model MPF3204AT
– Quantum 30 GB model Fireball Plus AS 0A1Y
– Seagate 10 GB model ST320212A version 3.02
– Seagate 20 GB model ST320423A version 3.02 <\/p>\n
REMOVABLE MEDIA DRIVES
Fuji Film 100 MB modelZIP100 version H.14 ***
Fujitsu 230 MB model MCE3023SS version 0030 †
Fujitsu 230 MB model M2512EL version 0010 †
Fujitsu 230 MB model M2513A version1300 See notes ††, §
Fujitsu 230 MB model M2513E version See notes ††, §
Fujitsu 1.3 GB model MCD3130SS version 0010 See note ††
Iomega 100 MB model ZIP100 version H.14 ***
Iomega 250 MB model ZIP250 version H.41 <\/p>\n
* The drive should be set to SCSI ID #5 and you should “Make Active”
** A “Hard Disk Read Error” message may appear when trying to access it during the CD-Rom sleep mode, but there is no problem trying “Access” many
times.
*** Cannot use the write protect function
† May have noise on D-D recordings, however Save\/Load operations are OK.
†† Cannot use 640 MB disks due to 2048 sector size.
§ must Set Write Cache “OFF”<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[34449],"storecat":[],"itemids":[],"manufacturers":[33165],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n