{"id":33767,"date":"2012-02-27T00:00:00","date_gmt":"2012-02-27T00:00:00","guid":{"rendered":"http:\/\/www.sweetwater.com\/sweetcare\/?p=33767"},"modified":"2013-08-21T20:47:19","modified_gmt":"2013-08-21T20:47:19","slug":"set-tascam-dm3200-iffwdmmkii-up-for-logic-pro","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/set-tascam-dm3200-iffwdmmkii-up-for-logic-pro\/","title":{"rendered":"How do I set the Tascam DM3200\/IFFWDMmkII up for use with Logic Pro?"},"content":{"rendered":"

Note: page numbers refer to pages in the pdf manual for the DM3200. Also, the images in this tutorial were taken from a DM4800. If you see some extra options that are not on your board, that’s why.<\/p>\n

Set the output routing\u00a0<\/b>(see p.49):<\/p>\n

    \n
  1. Go to the\u00a0Routing>Output Slot<\/b>\u00a0screen by holding the\u00a0Alt<\/b>\u00a0button and pressing the\u00a0Routing\u00a0<\/b>button.\u00a0\"DM4800<\/a><\/li>\n
  2. Use\u00a0Pod 3\u00a0<\/b>knob to select\u00a0Slot 1 1-8<\/b>, and use\u00a0Pod 4<\/b>\u00a0to set\u00a0Source Select<\/b>\u00a0to\u00a0Buss\/Direct<\/b>.\u00a0\"DM4800<\/a><\/li>\n
  3. Set\u00a0Outs 1-8<\/b>\u00a0to\u00a0Buss\/Direct 1-8<\/b>\u00a0in order using the\u00a0arrow keys, data wheel and enter button<\/b>.\u00a0\"DM4800<\/a><\/li>\n
  4. Do that same thing for\u00a09-16<\/b>.\u00a0\"DM4800<\/a><\/li>\n<\/ol>\n

    Set at least two inputs to monitor Slot 1 returns<\/b>\u00a0(see p.47):<\/p>\n

      \n
    1. Go to\u00a0Routing>Input\u00a0<\/b>by pressing the\u00a0tab button<\/b>\u00a0below the\u00a0Input tab<\/b>\u00a0at the bottom of the screen.<\/li>\n
    2. On the DM3200, it’s suggested to start with the FW\/Slot returns at channel 17 and up so you don’t waste any of your analog input channels.<\/li>\n
    3. Use the\u00a0Pod 3<\/b>\u00a0knob to set\u00a0Layer Select<\/b>\u00a0to\u00a0Ch.17-32<\/b>.<\/li>\n
    4. Use the\u00a0Pod 4\u00a0<\/b>knob to set\u00a0Source Select<\/b>\u00a0to\u00a0Slot 1<\/b>.<\/li>\n
    5. Use the\u00a0arrow keys, data wheel and enter button<\/b>\u00a0to set\u00a0INP Ch17<\/b>\u00a0to\u00a0Slot 1-1<\/b>\u00a0and\u00a0INP Ch18<\/b>\u00a0to\u00a0Slot 1-2<\/b>\u00a0(if you want to monitor more than just two channels through the board, for instance to mix in the board rather than mixing in software, you could set up additional inputs on the board to mix additional outputs from Logic).\u00a0\"DM3200<\/a><\/li>\n<\/ol>\n

      Route your input channels to the Direct outputs\u00a0<\/b>(see p.51):<\/p>\n

        \n
      1. To the right of the Stereo fader on the board press the\u00a0Layer Status\u00a0<\/b>button for\u00a0Ch.1-16<\/b>.<\/li>\n
      2. Press the\u00a0SEL<\/b>\u00a0button above your input channel on the board to select that channel.\u00a0\"DM4800<\/a><\/li>\n
      3. On the left side of the board, press the\u00a0Direct<\/b>\u00a0button in the\u00a0Output Assign<\/b>\u00a0section, and disable any other assignments in that area (only Direct should be lit up).\u00a0\"DM4800<\/a><\/li>\n<\/ol>\n

        Route the Slot return channels to the Stereo output<\/b>\u00a0(see p.51):<\/p>\n

          \n
        1. To the right of the Stereo fader on the board press the\u00a0Layer Status\u00a0<\/b>button for\u00a0Ch.17-32<\/b>.<\/li>\n
        2. Press the\u00a0SEL<\/b>\u00a0button above\u00a0Ch.17<\/b>.<\/li>\n
        3. On the left side of the board, press the\u00a0Stereo<\/b>\u00a0button in the\u00a0Output Assign\u00a0<\/b>section, and disable any other assignments in that area (only Stereo should be lit up).\u00a0\"DM4800<\/a><\/li>\n
        4. Turn the fader on that channel up to\u00a00db<\/b>\u00a0and\u00a0pan it left<\/b>.<\/li>\n
        5. Do the same things for\u00a0Ch.18<\/b>, but\u00a0pan it right<\/b>\u00a0(if you’re mixing in the board, the levels panning and effects on the Slot return channels will be your mix).
          \n          \"DM4800<\/a><\/li>\n<\/ol>\n

          In Logic, go to the Logic menu>Preferences>Audio<\/b> and set the Input Device <\/b>and Output Device<\/b> to the Tascam FW card<\/b>.<\/p>\n

          On the output of the tracks, set those to the first pair of output choices. Those should show up on Slot 1 ch 1-2, which we set to show up on Ch.17-18 on the board.<\/p>\n

          If you’d like to do transport and fader control of Logic from the DM3200, here’s a summary of the Macie Control Emulation for Logic:<\/p>\n

          The DM3200 needs to be connected via USB<\/b> to the computer.<\/p>\n

          On the DM3200<\/b>:<\/p>\n

            \n
          1. Go to Remote>Ext.CTRL<\/b> by holding the Alt<\/b> button and pressing the Remote<\/b> button then using the tab select<\/b> buttons to navigate to the Ext.CTRL tab.
            \n            \"DM4800<\/a><\/b><\/li>\n
          2. Add a 16 MC for Logic<\/b> by using POD 4<\/b> to select 16 MC for Logic<\/b> and pressing the Enter<\/b> button (the photo below was taken from a DM4800. Your board will say 16 instead of 24).
            \n            \"DM4800<\/a><\/li>\n
          3. Go to Remote>Machine.CTRL<\/b> by pressing the tab button <\/b>below the Machine CTRL <\/b>tab.<\/li>\n
          4. \n

            Select M MC for Logic<\/b>\u00a0using\u00a0POD 4<\/b>. Using the arrow keys<\/b>, make sure the arrow cursor<\/b> is next to the ADD<\/b> button, then press Enter<\/b>. Then, using the arrow keys<\/b>, move the cursor next to the TRA<\/b> option and press the Enter<\/b> button to enable TRA<\/b>.
            \n            \"DM4800<\/a>\"DM4800<\/a>\"DM4800<\/a><\/p>\n<\/li>\n<\/ol>\n

            In Logic<\/b>:<\/p>\n

              \n
            1. Go to the Logic menu>Preferences>Control Surfaces>Setup<\/b>.<\/li>\n
            2. Add a Mackie Control <\/b>and set it’s MIDI IO<\/b> ports to Port 5<\/b> (or Control Port 1) of the DM3200.<\/li>\n
            3. Add a Mackie Control Extender<\/b> and set it’s MIDI IO<\/b> ports to Port 6<\/b> (or Control port 2) of the DM3200.<\/li>\n<\/ol>\n

              The transport on the DM3200 should work all the time. The Faders and other functions work when the Layer Status on the board, to the right of the Stereo fader, is set to Remote.<\/p>\n

              <\/div>\n
              <\/div>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[115901,34223,36293,53649,55833],"storecat":[],"itemids":[3584],"manufacturers":[33792,33207],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n