To put the surface into Test Mode:<\/p>\n
MC Mix & MC Control:<\/p>\n
– press and hold Bank L, Bank R and Nudge R while you power on the unit.
– this will put the unit into test mode.<\/p>\n
MC Transport:<\/p>\n
– press and hold Soft-Key buttons #1, 3 & 5 while you power up the surface.<\/p>\n
What can you test:<\/p>\n
– Faders: move any fader. The adjacent fader should move also, following the moves of the one you are touching.
– Touching the Fader Cap will cause the corresponding ‘ON’ button to turn off.
– Turning knobs will display the value on the display
– Touching the knobs will display ‘Touch’ on the corresponding display
– Pressing the knob-tops will display ‘Switch’ on the corresponding display.
– Jog \/ Data wheels display values as you turn left or right
– Shuttle Ring (MC Transport only) will display positive (right) or negative (left) values. It will display “SHTL MID” at the null position.
– Leds \/ Buttons: pressing any button will display its name on the touch screen (MC Control) or on the OLEDs (MC Mix).
– Please note that not all buttons have Leds. The following buttons do not have Leds:
– Nudge, Bank, Power, and Back (MC Mix & MC Control)
– SoftKeys Up\/Down and 12 surface SoftKeys (MC Control only)<\/p>\n
TFT Calibration Mode (MC Control only):<\/p>\n
– Using the above Test mode on the MC Control, touch the TFT screen with your finger. This will begin calibration mode.
– Press and hold directly on the cross-hairs until it moves to a new location. Repeat until complete.<\/p>\n
Auto-Test mode: (MC Mix & MC Control only) <\/p>\n
– press and hold the Left surface Shift button, Bank L, Bank R and Nudge R while you power on the unit.
– In this mode each fader should glide up and down one fader at a time. <\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[8767,8775,25591],"manufacturers":[33345],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\t\n