{"id":32923,"date":"2008-10-13T00:00:00","date_gmt":"2008-10-13T00:00:00","guid":{"rendered":"http:\/\/www.sweetwater.com\/sweetcare\/?p=32923"},"modified":"2008-10-13T00:00:00","modified_gmt":"2008-10-13T00:00:00","slug":"know-what-bank-patch-value-send-receptor","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/know-what-bank-patch-value-send-receptor\/","title":{"rendered":"How do I know what Bank\/Patch value to send to Receptor?"},"content":{"rendered":"

Receptor’s Bank\/Patch Select panel always displays the MSB\/LSB\/PGM message required to select a given patch. For example, if you wanted your MIDI sequencer to send a bank\/patch change message that selected Receptor MULTI patch “006:Keys, bass, ac gtr” from the “” MULTI bank, you have only to open the Bank\/Patch select panel for the Multi. When you select a Multi Patch in the Bank Select Panel, Receptor displays that bank’s MSB\/LSB assignment at the bottom left corner of the panel. Therefore, we can see that, when we select the Bank, the lower left corner of the Bank\/Patch panel says “MSB\/LSB: 000\/002”. Therefore, we know that if we send Receptor an MSB (CC00) value of 0 followed by an LSB (CC32) value of 2, that Receptor will select the MULTI bank. To select the “006:Keys, bass, ac gtr” patch from within that bank, we need then send only the MIDI program change number to select that patch. Receptor numbers its patches from 1-128, so if you’re sequencer only sends PGM changes from 0-127, then you need to remember to subtract one from the patch number shown on Receptor. So, to select “006:Keys, bass, ac gtr” from the “” MULTI bank, you would program your sequencer to send: CC00 = 0 + CC32 = 2 + PGM = 5<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[28356],"manufacturers":[33572],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\t\n