The following is a list of BIOS settings that are changed during the build process to optimize the system for audio. To enter the BIOS, repeatedly tap the “Delete” key as the Creation Station powers up. You should see “Entering Setup…” on the screen just before entering the BIOS. When in the BIOS, you will use the arrow keys on the keyboard to navigate, and the key to make selections. Only the settings that are changed are listed, so if there is question whether other settings may have changed navigate to the “Exit” tab, select “Load Setup Defaults” and press ENTER.<\/p>\n
– “Main” tab<\/p>\n
o Set the Date and Time
\no Legacy Diskette A = Disabled
\no IDE Configuration (select and press enter)
\nConfigure SATA As = RAID<\/p>\n
– “Advanced” tab
\no USB Configuration (select and press enter)
\nUSB 2.0 Controller Mode = HiSpeed
\no CPU Configuration
\nIntel SpeedStep technology = Disabled
\no Onboard Devices Configuration (select and press enter)
\nHD Audio Controller = Disabled<\/p>\n
Marvell SATA Controller: Disabled<\/p>\n
Serial Port 1 Address = Disabled
\nParallel Port Address = Disabled<\/p>\n
– “Power” tab
\no Hardware Monitor (select and press enter)
\nCPU Q-Fan Control = Enabled<\/p>\n
– “Boot” tab
\no Boot Device Priority * (select and press enter)
\n1st Boot Device = DVD drive (PM-Lite On DVDRW, or ATAPI CD-ROM)
\n3rd Boot Device = Disabled
\no Boot Settings Configuration
\nFull Screen Logo = Disabled<\/p>\n
When these changes have been completed, go to the “Exit” tab and choose the option to save the changes and exit. Your Creation Station will now reboot with its factory BIOS settings.<\/p>\n
<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[35746,35934],"storecat":[],"itemids":[3031,20294,20305,20306],"manufacturers":[],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n