– Connect your HD24 and computer with a Category-5 “crossover” ethernet cable. Then follow these steps. <\/p>\n
1. On your computer: -Click “Start” -Click on “Control Panel” <\/p>\n
2. Double-click “Network Connections”, then Right click on “Local Area Connection” for the Ethernet port and choose”Properties” <\/p>\n
3. Make sure that “Internet Protocol TCP\/IP” is there and checked, if not, click the “Install” button, and install this protocol. <\/p>\n
4. Double-click on “Internet Protocol TCP\/IP”. There, choose “Use the following IP address” Ensure your computers settings are:
IP Address – 192.168.001.101
Subnet – 255.255.255.0
Gateway – 192.168.001.101 <\/p>\n
The only other thing is to ensure the user name and password are “anonymous” in your FTP program, unless you have previously changed them in the HD24.<\/p>\n
5. Now, put the HD24 into FTP Server Mode. See page 75-76 to set the HD24 and place into sever mode. Those two pages step you right through those settings.<\/p>\n
6. Then, open your FTP program on your PC to access the HD24. In your case, you can use Internet Explorer on your PC for FTP. In the address field in Explorer type in the HD24’s IP address(192.168.1.100), ensure the user name and password are “anonymous”, and you’re connected.
* Check out the HD24 manual page 84 which explains using Explorer on your PC *<\/p>\n
When you see the contents of the HD24 in Explorer, you should the the old operating system, probably named “HD24_OS_1.00” or something like that. You should be able to copy the the HD24_os_v120.syx file downloaded from www.alesis.com<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[35082],"storecat":[],"itemids":[],"manufacturers":[33168],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n