KURZWEIL K2000 SCSI HELP<\/p>\n
Here are some basic guidelines to follow when configuring a SCSI chain:<\/p>\n
1. Including a minimum of I foot for intemal cabling of each device in the chain,
the total length of the chain should not exceed IB feet.<\/p>\n
2. No single cable length in the chain should exceed 8 feet.<\/p>\n
3. The first and last device in the chain must be terminated.<\/p>\n
4. If the chain exceeds 1 0 feet, a pass through terminator should be used near
the mid point of the chain.<\/p>\n
5. Each device in the chain (including int. hard drives) must have its own unique
SCSI ID. The default K2000 ID is #6. Macintoshes use ID #7 & 0.<\/p>\n
6. Theoretically all eight SCSI IDs could be used, however, real world
experience tells us that the true limitation is about 5 devices in the chain.<\/p>\n
7. Use only true SCSI cables – high quality, twisted pair, shielded SCSI cable.
Do not use RS432 or other non SCSI cables.<\/p>\n
8. lmpedence mismatching between cables from different manufacturers can
cause problems. Avoid this when possible.<\/p>\n
9. Make all of your SCSI connections before powering up.<\/p>\n
1 0. Authorized service centers will remove termination from the K2000 when
installing an internal drive, set its ID correctly, and terminate the drive.<\/p>\n
1 1. When using a Macintosh, power up the K2000 and other devices first.<\/p>\n
12. The K2000 file format is a proprietary format; no other device will be able to
read or write a Kurzweil file.<\/p>\n
13. The floppy disk format of the K2000 is DOS. The SCSI disk format is close
to DOS, but it is = DOS. In Version 3 instruments, the SCSI format is true
DOS, however disk partitioning is not supported.<\/p>\n
14. lt is possible to view, copy, move, name, delete files on a K2000 formatted
floppy disk or removable media hard drive, with a PC or Macintosh running a
DOS mounting utility program such as Access PC.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[33899,33898],"storecat":[],"itemids":[],"manufacturers":[],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n