Melodyne can be run as a ReWire master and as a ReWire slave. Here are two examples, one for each case: <\/p>\n
Melodyne as a ReWire Master<\/p>\n
1. Start Melodyne.
2. Open a new file (or existing arrangment).
3. Open the ReWire Devices panel from the Windows menu:<\/p>\n
4. Choose the ReWire client application from the pop up in the upper left corner.
5. Start the ReWire application (either by pressing the ‘Start Application’ button or by launching it from the Finder, Dock, Start Menu or Explorer).
6. Choose the number of channels you want to have by clicking on the check boxes in Melodyne’s ReWire Devices panel.
7. For each ReWire channel Melodyne adds a new channel strip in the mixer, which is fed by the corresponding output channel of the other application:<\/p>\n
The first two channels may be grouped as one stereo channel strip.
8. Press play and do your work. It is also possible to connect more than one application to Melodyne.
9. Always quit the client application before you quit Melodyne! <\/p>\n
Note: The “ReWire Devices” does always relate to the foremost arrangement. As the first two ReWire channels are grouped in most cases, the second channel may be enabled automatically when you enable the first one and vice versa.<\/p>\n
Melodyne as a ReWire Slave<\/p>\n
1. Start the host application and choose the Melodyne ReWire channels from the application’s ReWire panel:<\/p>\n
2. Start Melodyne.
3. Melodyne will detect the host application and will ask you if you want to connect to it:<\/p>\n
4. Choose “ReWire”.
5. If not already done setup the buffer configuration. For that purpose, open Melodyne’s preferences panel and make sure that the size of audio buffers is larger than the I\/O buffer size of the master application.<\/p>\n
In the given example, the audio I\/O buffers of Live are 512 samples large, while Melodyne’s buffer size is 1024, which is a pretty good configuration.
6. Open a new or existing arrangement.
7. Open the mixer. The output channels in the mixer now relate to the corresponding rewire channels:<\/p>\n
Input channels are not available if you are connected to a ReWire application using Melodyne as a client.
8. In contrast to other ReWire implementations, you do not need to quit the applications in any specific order. If you restart ‘Live’ without quitting Melodyne, the application will be reconnected automatically.<\/p>\n
Technical note: Melodyne does not load a full ‘engine’ into the host application. Instead it uses the technology of the MelodyneBridge to pipe the audio I\/O from Melodyne to the host.<\/p>\n
Melodyne does not support ReWire on Mac OS 9.<\/p>\n
For more information about ReWire, check Propellerheads homepage.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[8861],"manufacturers":[],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n