The first step in making a CD is to make sure that your song is mixed down to 2 tracks. In the VS-2400 & VS-2480 the easiest way to do this is by using the Mastering Room.<\/p>\n
Step 1.) Push the “CDRW Mastering” Button.<\/p>\n
Step 2.) Choose “Mastering Room”<\/p>\n
Step 3.) Turn Mastering Room to “On”, and set Status to “Record”. Notice also the field labeled “V-Track”. It likely reads “23\/24-16” This will tell you to what tracks and V-Tracks you mix is being recorded to. There is little reason to change it, but you need to be aware of it for later….<\/p>\n
Step 4.) Make certain that all of the tracks you want included in the mix are set to play, and have their faders up.<\/p>\n
Step 5.) Push “Record” and “Play”<\/p>\n
Step 6.) After the song is done, push “Stop”.<\/p>\n
Step 7.) To listen to your mix, change the status of the Mastering Room from “Rec” to “Play”.<\/p>\n
Step 8.) Push “Play”. You are now hearing your 2 Track Mix.<\/p>\n
Step 9.) Push “CDRW Mastering” and choose, “CD-R Write”. When asked to “Save Current?” Choose Yes.<\/p>\n
Step 10.) In the CD Write window that pops up, you will see, on the left side, a couple of boxes labeled “L-CH Source Track” and “R-CH Source Track”. These should be set to the same 2 tracks that you mixed down to.<\/p>\n
Step 11.) On the right hand side, set “Write Method” to “Disc at Once”, and “Finalize” to “On”<\/p>\n
Step 12.) Press F5 to begin burning your disc.<\/p>\n
<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[1],"tags":[35608],"storecat":[],"itemids":[],"manufacturers":[33684],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n