To split the keyboard, the XP-80 needs to be in PERFORMANCE LAYER Mode. For the purposes of this example, we will select PR-A: 12 POP SET 1. This particular Performance is in PERFORMANCE SINGLE Mode (which is primarily used for sequencing). We will change it to PERFORMANCE LAYER Mode. <\/p>\n
Use the following procedure to select PR-A: POP SET 1:<\/p>\n
1. Press PERFORM.<\/p>\n
2. Hold SHIFT and press number 1 on the keypad.<\/p>\n
3. Use the VALUE DIAL to select “PR-A: 12 POP SET 1.”<\/p>\n
Use the following procedure to split the keyboard:<\/p>\n
1. Press F1 [Common].<\/p>\n
2. Use the CURSOR buttons to select “KEY MODE” and use the VALUE DIAL to select “LAYER.”<\/p>\n
3. Press F4 [MIDI](make sure the TRACK\/PART #1 button is lit).<\/p>\n
4. Use the CURSOR and TRACK\/PART buttons to select the “Local Switch.”<\/p>\n
5. Use the VALUE DIAL to select “ON.”<\/p>\n
6. Repeat steps 4-5 for Part 2.<\/p>\n
7. Press PERFORM, then F2 [K. Range].<\/p>\n
8. Use the CURSOR buttons and the VALUE DIAL to select “C4:G9” for PART 1 and “C-1:B3” for PART 2.<\/p>\n
NOTE: There will now be a Piano Patch for the upper keyboard range and a Bass Patch on the lower keyboard range. <\/p>\n
Use the following procedure to select sounds for the two parts:<\/p>\n
1. Press F3 [Part](make sure the TRACK\/PART #1 button is
lit).<\/p>\n
2. Use the CURSOR buttons and the VALUE DIAL to select the desired PATCH GROUP and PATCH NUMBER.<\/p>\n
3. Press the TRACK\/PART 2 button and select the desired PATCH GROUP and PATCH NUMBER.<\/p>\n
4. Press PERFORM to return to the play screen.<\/p>\n
NOTE: Part 1 will play on the right side of the keyboard and Part 2 will play on the left side of the keyboard.<\/p>\n
NOTE: By repeating these steps for additional Parts (3 through 16), you can add additional Patches, each with their own Key Range.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[34364],"storecat":[],"itemids":[],"manufacturers":[33684],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n