Use the following procedure to edit and write a Performance to the User Memory:<\/p>\n
1. Press the VALUE knob several times so that PERFORM is lit by itself.<\/p>\n
2. Turn the VALUE knob and turn the CATEGORY\/BANK knob to select a Performance for editing.<\/p>\n
3. Turn the PART\/PATCH RX CH knob to select a PART to be edited. Both PATCH and PERFORM will be lit.<\/p>\n
NOTE: When both PATCH and PERFORM are lit, edits can be made to the Performance.<\/p>\n
4. When you are finished editing the Performance, press the VALUE knob one time so that PERFORM is lit by itself.<\/p>\n
5. Press and hold VOLUME, then press VALUE.<\/p>\n
6. Turn CATEGORY\/BANK to select PIANO to enter the UTILITY mode.<\/p>\n
7. Turn VALUE to select “Wrt” (write) in the display.<\/p>\n
8. Press VALUE enter the WRITE mode.<\/p>\n
9. Turn VALUE to select a USER location for storing the edited Performance.<\/p>\n
10. Press VALUE to display a flashing “Sur.” (Are you sure?)<\/p>\n
11. Press VALUE again to confirm your selection and write the Performance to memory.<\/p>\n
NOTE: The display icons will flash momentarily while the write procedure is completed.<\/p>\n
12. Press and hold VOLUME, then press VALUE to exit.<\/p>\n","protected":false},"featured_media":0,"template":"","categories":[],"tags":[],"storecat":[],"itemids":[32990],"manufacturers":[33684],"acf":[],"yoast_head":"\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n