Register Your Behringer to Get the Full Warranty<\/h2>\n\n\n\n
TIP<\/strong>: Everything you purchase from Sweetwater<\/strong> comes with our 2-year Total Confidence Coverage (TCC) warranty<\/a>. However, three years are even better than two, so please register with Behringer today.<\/p>\n\n\n\n Behringer gives you a 1-year warranty. However, if you register your product within 90 days of purchase, then Behringer gives you a free 3-year warranty.<\/p>\n\n\n\n Follow the instructions in our SweetCare guide: How to Register Your Behringer to Get the Full Warranty<\/a>.<\/p>\n\n\n\n <\/p>\n\n\n\n An audio driver is custom software that you install on your computer to connect it with your audio interface. If you are using your DICE with a Windows PC, either with an Intel or AMD processor, or Windows on Arm<\/a>, you must install the Behringer DICE USB Audio Driver <\/strong>first. <\/p>\n\n\n\n If you are using your DICE on a Mac, iPhone, iPad or an Android device, then your unit is \u201cclass compliant\u201d and there is no audio driver to install. You can skip this section.<\/p>\n\n\n\n Behringer makes the DICE owner\u2019s manual available as a webpage.<\/p>\n\n\n\n With your DICE connected directly to your computer with a USB-C data cable, here\u2019s how to configure your computer to use the DICE as the main audio device.<\/p>\n\n\n\n You can adjust the sample rate and bit depth for the DICE using the Audio Devices pane in the Audio MIDI Setup<\/strong> app.<\/p>\n\n\n\n When using the DICE with your DAW (digital audio workstation software) you need to configure the DAW to use the DICE as the main source for input and output. Consult your DAW owner\u2019s manual for instructions on selecting the audio interface and configuring it.<\/p>\n\n\n\n The two USB-C ports serve different functions.<\/em><\/p>\n\n\n\n You can power your DICE from your computer over the same USB-C connection used for the audio data. On your DICE, connect a USB-C data cable to the primary USB-C port on the right. Plug the data cable directly into a port on your Mac or Windows PC. Don\u2019t connect this to a USB hub or dock.<\/p>\n\n\n\n If you’re using the DICE with a device such as a phone or tablet, then you can power the DICE through the secondary USB-C port on the left using a 5-volt USB power supply, while also connecting to your host with a USB-C data cable using the primary port. This way, you won\u2019t drain the power on your device while using the audio interface.<\/p>\n\n\n\n You can also power the DICE with a 5-volt USB power supply if you’re using it only as an analog microphone preamp and not as an audio interface.<\/p>\n\n\n\n Front panel controls on the Behringer DICE 1U2 and 2U2<\/em><\/p>\n\n\n\n Turn all knobs all the way down before you connect or disconnect any cables.<\/p>\n\n\n\n While each model of DICE has a different number and configuration of inputs and outputs, and different controls available, the basic connections are the same. Here are the connections and controls for the 1U2 and 2U2 models.<\/p>\n\n\n\n Combo jacks can accept either a balanced 3-pin XLR cable connection, a balanced TRS <\/a>1\/4-inch cable, or an unbalanced TS <\/a>1\/4-inch instrument cable. You can then adjust the Input knob for that channel to account for the signal level coming from your instrument or microphone.<\/p>\n\n\n\n The 1U2 has a dedicated TS 1\/4-inch high-impedance input for plugging in your guitar.<\/p>\n\n\n\n Connect headphones with a TRS 1\/4-inch connection.<\/p>\n\n\n\n On the back panel, connect powered speakers to the Left and Right outputs using balanced TRS cables for stereo. Make sure the power to the speakers is turned off when you connect the cables.<\/p>\n\n\n\n Use this to adjust the input level for the channel. The halo around the knob lights up to indicate that signal is being received.<\/p>\n\n\n\n Adjusts the output level of the Main speaker outputs on the rear panel.<\/p>\n\n\n\n Engage this to provide 48-volt power to condenser microphones. The halo lights red to indicate that the power is engaged.<\/p>\n\n\n\n Set this switch to adjust the input for either an instrument connected with an unbalanced TS cable or a line level source connected with a balanced TRS cable.<\/p>\n\n\n\n The 2U2 has a switch for each channel to engage a high shelf filter to enhance the top end.<\/p>\n\n\n\n Use this to select what you hear in direct monitoring of the inputs. When the switch is set to Mono, inputs are heard in mono. When the switch is set to Stereo, one input is panned left and the other is panned right.<\/p>\n\n\n\n Here\u2019s Behringer\u2019s introductory video with an overview of the basics of using your DICE audio interface, followed by a description of the features of all the models in the line, current and forthcoming.<\/p>\n\n\n\nWindows Users: Download & Install the ASIO Audio Driver<\/h2>\n\n\n\n
Online Owner\u2019s Manuals<\/h2>\n\n\n\n
Set the DICE as Your Computer\u2019s Recording & Playback Device<\/h2>\n\n\n\n
Windows PC<\/h3>\n\n\n\n
Mac<\/h3>\n\n\n\n
Setting Up Your DICE with Your DAW<\/h3>\n\n\n\n
Set Up & Connect Your Gear<\/h2>\n\n\n\n
Power<\/h3>\n\n\n\n
![\"\"](\"https:\/\/www.sweetwater.com\/sweetcare\/media\/2026\/10\/image-1024x432.jpeg\")
<\/a><\/figure>\n\n\n\nInputs, Outputs & Controls<\/h3>\n\n\n\n
![\"\"](\"https:\/\/www.sweetwater.com\/sweetcare\/media\/2026\/10\/image-2-1024x391.jpeg\")
<\/a><\/figure>\n\n\n\nCombo Jack Preamp Inputs<\/h3>\n\n\n\n
Line Input<\/h3>\n\n\n\n
Headphone Output<\/h3>\n\n\n\n
Main Outputs<\/h3>\n\n\n\n
Input Gain Knobs<\/h3>\n\n\n\n
Main Knob<\/h3>\n\n\n\n
48V Button<\/h3>\n\n\n\n
INST\/LINE Switch<\/h3>\n\n\n\n
Shine Switch<\/h3>\n\n\n\n
Mono\/Stereo Switch<\/h3>\n\n\n\n
Behringer Video<\/h2>\n\n\n\n