{"id":1781050,"date":"2024-04-23T09:29:58","date_gmt":"2024-04-23T13:29:58","guid":{"rendered":"https:\/\/www.sweetwater.com\/sweetcare\/?post_type=articles&p=1781050"},"modified":"2024-04-23T10:14:31","modified_gmt":"2024-04-23T14:14:31","slug":"fender-switchboard-quickstart-guide","status":"publish","type":"articles","link":"https:\/\/www.sweetwater.com\/sweetcare\/articles\/fender-switchboard-quickstart-guide\/","title":{"rendered":"Fender Switchboard Quickstart Guide"},"content":{"rendered":"\n

The Fender Switchboard Effects Operator lets you set up hundreds of signal-routing combinations for your own pedalboard, all recallable with a tap of a footswitch. You can also use it to control your amps with footswitch connections and MIDI. Let\u2019s get started.<\/p>\n\n\n\n

  1. Register Your Purchase with Fender<\/strong><\/a><\/li>
  2. Fender Switchboard Connections and Controls<\/strong><\/a><\/li>
  3. Basic Operation<\/a><\/strong><\/li><\/ol>\n\n\n\n

    Register Your Purchase with Fender<\/h2>\n\n\n\n

    Go to Fender.com<\/a> and click on the person icon<\/strong> in the upper-right corner of the screen. Log in to your account or create a new one.<\/p>\n\n\n\n

    On your Account<\/em> page, in the pane on the left and under Product Registration<\/em>, click Add Products<\/strong>.<\/p>\n\n\n\n

    Enter your unit\u2019s serial number and follow the prompts. Your unit will appear in the My Gear<\/em> section.<\/p>\n\n\n\n

    Download the Owner\u2019s Manual<\/h3>\n\n\n\n

    To learn about all the Switchboard\u2019s capabilities and to configure everything you need in each preset, you will need to download the owner\u2019s manual for reference.<\/p>\n\n\n\n

    Go to the Fender Switchboard product page<\/a>. Scroll down and click the Downloads<\/strong> tab. Download the owner\u2019s manual.<\/p>\n\n\n\n

    Update the Firmware<\/h3>\n\n\n\n
    \"Fender<\/figure>\n\n\n\n

    The Fender Switchboard firmware-update app on macOS<\/em><\/p>\n\n\n\n

    From time to time, Fender may release firmware updates to fix bugs and add additional features. To update your Switchboard, connect it to your Mac or your Windows PC with a USB-C cable, then run Fender\u2019s update app.<\/p>\n\n\n\n

    1. On your computer, go to the Fender Support Switchboard firmware update page<\/a>.<\/li>
    2. Download the newest version of the updater app for Mac or PC.<\/li>
    3. Open the app.<\/li>
    4. Connect the Switchboard using a USB-C data cable.<\/li>
    5. Power on the Switchboard using a 9VDC power supply.<\/li>
    6. In the app, click the Scan<\/strong> button.<\/li><\/ol>\n\n\n\n

      Under Device<\/em>, the app will detect your Switchboard and display the firmware version number already installed. Take note of this number.<\/p>\n\n\n\n

      Under Update File<\/em>, you can see the version number of the newest firmware.<\/p>\n\n\n\n

      If the number is higher than the version already installed on your Switchboard, you need to perform the update. If not, you can quit the app and disconnect the USB cable.<\/p>\n\n\n\n

      To perform the update:<\/p>\n\n\n\n

      1. Click Start<\/strong>.<\/li>
      2. The app will display a progress bar during the update. At the end, the Switchboard will reboot.<\/li>
      3. The app will display, \u201cUpdate complete!\u201d<\/li><\/ol>\n\n\n\n

        IMPORTANT<\/strong>: During the firmware update, do not touch any controls on the Switchboard. Do not disconnect the USB cable or disconnect the power to the Switchboard. Do not quit the app on your computer or shut your computer down. Wait until the app displays, \u201cUpdate complete!\u201d<\/p>\n\n\n\n

        Fender releases a new version of the updater app for each new firmware. An old version of the app will not tell you if there is a newer version available. In the future, if you want to check to see if there is a newer version, go back to the Fender Switchboard firmware-update page on the website and download it.<\/p>\n\n\n\n

        Fender Switchboard Connections and Controls<\/h2>\n\n\n\n

        TIP<\/strong>: Make sure the unit is powered down before you connect inputs and outputs.<\/p>\n\n\n\n

        Back Panel Connections<\/h3>\n\n\n\n
        \"Fender<\/a><\/figure><\/div>\n\n\n\n

        Fender Switchboard connections<\/em><\/p>\n\n\n\n

        Power<\/h4>\n\n\n\n

        Power the Switchboard with a 9V 500mA pedalboard power supply (not included).<\/p>\n\n\n\n

        Mono Instrument Input<\/h4>\n\n\n\n

        Connect your guitar or your signal chain with a 1\/4-inch instrument cable.<\/p>\n\n\n\n

        Mono Effects Loops 1\u20134<\/h4>\n\n\n\n

        Use 1\/4-inch TS<\/a> patch cables to connect an effects pedal or a group of pedals.<\/p>\n\n\n\n

        Switchable Mono\/Stereo Effects Loop 5<\/h4>\n\n\n\n

        This effects loop can be used as a mono send and return like Loops 1\u20134, or, using 1\/4-inch TRS<\/a> connectors, it can be configured for a stereo effect.<\/p>\n\n\n\n

        Switchable Mono\/Stereo Output<\/h4>\n\n\n\n

        The Output is where you connect the Switchboard to the next pedal in your signal path or to your amplifier. In Mono mode, use a regular TS instrument cable.<\/p>\n\n\n\n

        Move the switch from Mono to Stereo, and Effects Loop 5 is configured for TRS stereo send and return, and Output is configured for TRS stereo output.<\/p>\n\n\n\n

        Expression Pedal Input<\/h4>\n\n\n\n

        Connect a 1\/4-inch TRS cable from an external expression pedal (not included) for use as a volume pedal. By default, this is in the fifth position of the signal path, but you can change its position using Loop Mode Editor. To configure your expression pedal to work correctly with the Switchboard, you must calibrate its range in the Global Settings menu. Learn more in the Fender Switchboard Owner\u2019s Manual > Loop Mode > Internal Volume Pedal<\/strong>.<\/p>\n\n\n\n

        Footswitch Out<\/h4>\n\n\n\n

        You can use the Switchboard in place of a separate footswitch for your amplifier or for many effects pedals that have a footswitch input. Examples would be for channel switching, engaging reverb, or tap tempo. Connect a 1\/4-inch TRS cable from this output directly to the footswitch input on your effect or amp. Learn more in the Fender Switchboard Owner\u2019s Manual > Basics and Setup<\/strong>.<\/p>\n\n\n\n

        MIDI Out<\/h4>\n\n\n\n

        You can use the Switchboard to send MIDI commands to pedals and amplifiers that accept MIDI control. You can configure each preset to send different MIDI messages.<\/p>\n\n\n\n

        Connect a 5-pin DIN MIDI cable to use the Switchboard to send a MIDI PM (Program Change) command to outboard gear when you load a new preset. You can also configure the Switchboard\u2019s external expression pedal to send CC (Continuous Controller) commands to external gear. Learn more in the Fender Switchboard Owner\u2019s Manual > Preset Editor > MIDI Edit Menu<\/strong>.<\/p>\n\n\n\n

        USB-C<\/h4>\n\n\n\n

        This port is used to update the Switchboard\u2019s firmware, as we explained above.<\/p>\n\n\n\n

        Front Panel Controls<\/h3>\n\n\n\n
        \"Fender<\/a><\/figure>\n\n\n\n

        Fender Switchboard controls<\/em><\/p>\n\n\n\n

        Rotary Encoder Knob<\/h4>\n\n\n\n

        Press the knob down to enter Edit Mode<\/em>. Turn the knob to scroll through menus on the display.<\/p>\n\n\n\n

        Display Screen<\/h4>\n\n\n\n

        Shows whether you are in Loop Mode<\/em> or Bank Mode<\/em> and shows preset- and bank selections.<\/p>\n\n\n\n

        Footswitches<\/h4>\n\n\n\n

        Footswitches 1\u20134 act as latching<\/em> footswitches when tapped. These are used to toggle a feature on and off. Hold down a footswitch, and it becomes a momentary<\/em> footswitch, which only engages a feature while the switch is held down.<\/p>\n\n\n\n

        You can configure each of the five loops to have its own color, which is shown on the LED above each footswitch.<\/p>\n\n\n\n

        Footswitch 1<\/h5>\n\n\n\n

        Turn Loop 1 on and off, engage preset 1, or select the current highlighted menu on the display screen.<\/p>\n\n\n\n

        Footswitch 2<\/h5>\n\n\n\n

        Turn Loop 2 on and off or engage preset 2.<\/p>\n\n\n\n

        Footswitch 3<\/h5>\n\n\n\n

        Turn Loop 3 on and off or engage preset 3.<\/p>\n\n\n\n

        Footswitch 4<\/h5>\n\n\n\n

        Turn Loop 4 on and off, engage preset 4, or return to the previous menu.<\/p>\n\n\n\n

        Footswitch 5<\/h5>\n\n\n\n

        Turn Loop 5 on and off, change from Loop Mode to Bank Mode, or move down in the current menu.<\/p>\n\n\n\n

        Footswitch FS<\/h5>\n\n\n\n

        Use this to activate the tuner, toggle the Footswitch Output, and move up in the current menu.<\/p>\n\n\n\n

        Basic Operation<\/h2>\n\n\n\n

        With the Switchboard, you can devise your own custom signal chains \u2014 hundreds of them \u2014 with the effects on your pedalboard. You can create your own combinations of effects and experiment with different pedal orders without having to move your pedals around or swap cables. When you find the combinations that work, you can save them in the Switchboard\u2019s memory as presets. You can then construct Banks of four presets each and edit the order of Banks so that you can step through them in your live set.<\/p>\n\n\n\n

        Modes<\/h3>\n\n\n\n

        The Switchboard has two Modes. Change between them by holding down Footswitch 5.<\/p>\n\n\n\n

        Loop Mode<\/h4>\n\n\n\n

        Rearrange and control pedals in real time using Loop Mode. The display shows you the order of your signal chain and which loops are on or bypassed.<\/p>\n\n\n\n

        Engage the Loop Mode Editor<\/em> by holding down Footswitch 5 and Footswitch FS together. You can change the loop order, move the location of the volume pedal, toggle the input and output buffers on and off, and configure the function of the Footswitch Out.<\/p>\n\n\n\n

        To save a preset, press and hold the Encoder knob to access the Save menu, choose the location to save it, and give it a name.<\/p>\n\n\n\n

        Press Footswitch 5 and Footswitch FS simultaneously to exit the Editor and return to Loop Mode.<\/p>\n\n\n\n

        Learn more in the Fender Switchboard Owner\u2019s Manual > Loop Mode Editor<\/strong>.<\/p>\n\n\n\n

        Bank Mode<\/h5>\n\n\n\n

        Save and recall presets using Bank Mode.<\/p>\n\n\n\n

        Each preset saves a set of parameters. In each preset you can:<\/p>\n\n\n\n

        • Set the order of the loops and the signal path<\/li>
        • Set which loops are on or bypassed<\/li>
        • Set the position of the volume pedal in the signal chain<\/li>
        • Configure the status of the Footswitch Output, MIDI output, and MIDI expression pedal<\/li>
        • Set the configuration of the input and output buffers (to accommodate certain effects that are sensitive to impedance settings)<\/li><\/ul>\n\n\n\n

          Presets are organized into Banks. Each Bank holds four presets. There are 100 Banks. You can give a name to each Bank and rearrange their orders.<\/p>\n\n\n\n

          Use the rotary encoder knob or the footswitches to move from Bank to Bank and preset to preset.<\/p>\n\n\n\n

          The Preset Editor<\/em> provides a different organizational layout compared to the Loop Mode Editor. In Bank Mode, enter the Preset Editor by holding down Footswitch 5 and Footswitch FS together. You can use this mode to take control of the loops within a preset during a live performance and do manual overrides on the fly. The Preset Editor provides additional functions:<\/p>\n\n\n\n

          • Locking the volume pedal to a specific level (for example, to create a quieter preset for rhythm playing, or preset the gain for an overdrive pedal)<\/li>
          • Configuring which MIDI messages are saved to a preset<\/li>
          • Entering a name for the preset using the Encoder Knob<\/li><\/ul>\n\n\n\n

            Learn more in the Fender Switchboard Owner\u2019s Manual > Preset Editor<\/strong>.<\/p>\n\n\n\n

            Creating a New Preset<\/h3>\n\n\n\n
            1. Select an empty preset slot within a Bank.<\/li>
            2. Enter the Preset Editor.<\/li>
            3. Use the encoder and switches to rearrange the order of the loops and designate which ones are turned on or bypassed.<\/li>
            4. Press Footswitch 5<\/strong> and Footswitch FS<\/strong> together to save the preset.<\/li>
            5. Select Save<\/strong>, then choose to overwrite the current slot with your new preset. This will take you back to Bank Mode, where your new preset is active.<\/li><\/ol>\n\n\n\n

              Learn more in the Fender Switchboard Owner\u2019s Manual > Bank Mode: Creating Presets<\/strong>.<\/p>\n\n\n\n

              Favorites<\/h3>\n\n\n\n

              Aside from the 100 Banks with four presets each, the Switchboard has 100 Favorite slots which provide quick access to your favorites. This makes it easy to select a favorite preset and load it into a Bank.<\/p>\n\n\n\n

              Learn more in the Fender Switchboard Owner\u2019s Manual > Favorites<\/strong>.<\/p>\n\n\n\n

              Here\u2019s Fender\u2019s Switchboard walk-through video:<\/p>\n\n\n\n

              <\/p>\n\n\n\n

              \n